RC-Monster Forums - View Single Post

BrianG · 09:03 PM

Cells 2, 3, and 4 flashing mean those cells are higher voltage and the LBA is slowly discharging them until they get to whatever cell 1 voltage is.

The LBA is fairly sensitive so different LEDs might go on and off. That is normal. If the LEDs go from flashing to solid, that means the imbalance is larger and you should reduce the charge current so the balancer has time to discharge the high cells before the charger gets to the CV mode.

	(#7)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	06.17.2007, 09:01 PM Cells 2, 3, and 4 flashing mean those cells are higher voltage and the LBA is slowly discharging them until they get to whatever cell 1 voltage is. The LBA is fairly sensitive so different LEDs might go on and off. That is normal. If the LEDs go from flashing to solid, that means the imbalance is larger and you should reduce the charge current so the balancer has time to discharge the high cells before the charger gets to the CV mode. Last edited by BrianG; 06.17.2007 at 09:03 PM.