RC-Monster Forums - View Single Post - Quark/Neu No brakes at high speed problem

wallot · 09.27.2007, 08:45 AM

I used to have my quark setup for low timing, low start power, low drag brake and had to set braking EPA to about 70% (50-60% on high traction surface)then it worked perfectly. No problems with braking at all.
i had max 110A@18.5V on my 5S pack, then my second quark died.

On my new mgm drag braking is just too strong with neu and i have to run without it (i actually like it)

	(#6)
wallot RC-Monster Titanium Offline Posts: 1,025 Join Date: Jan 2007 Location: Prague, Czech Republic	09.27.2007, 08:45 AM I used to have my quark setup for low timing, low start power, low drag brake and had to set braking EPA to about 70% (50-60% on high traction surface)then it worked perfectly. No problems with braking at all. i had max 110A@18.5V on my 5S pack, then my second quark died. On my new mgm drag braking is just too strong with neu and i have to run without it (i actually like it) Radek V4 D8 - RX8, XERUN 4168SD F1-09 - Tekin RS Pro, 17.5t Redline, 2S LiPo Sakura Zero S - LRP, Saturn 20T, 2S LiPo EX-10 Eurus