RC-Monster Forums - View Single Post

ncalenda · 10.30.2007, 03:10 PM

Yes, min throttle is the brake position.

Here is that Petr said is the highest value possible. If you are too high you get the warning beeps like I did, which was BEEP..BEEP..BEEP over and over.

min value to be <= 1.1 or 1.2ms, no higher.

Good thing I bought the computer USB+, otherwise I would not have figured this out via email. Also, once the MIN value is wrong, you can't program it at all using the card or the PC. Well, what I didn't try, was to correct it via the PC, I might have been able to. Either way, I think my receiver may be the issue, since I'm having cut out issue with my other ESC.

	(#15)
ncalenda Need for Speed Offline Posts: 228 Join Date: Dec 2006 Location: Seaside, CA	10.30.2007, 03:10 PM Yes, min throttle is the brake position. Here is that Petr said is the highest value possible. If you are too high you get the warning beeps like I did, which was BEEP..BEEP..BEEP over and over. min value to be <= 1.1 or 1.2ms, no higher. Good thing I bought the computer USB+, otherwise I would not have figured this out via email. Also, once the MIN value is wrong, you can't program it at all using the card or the PC. Well, what I didn't try, was to correct it via the PC, I might have been able to. Either way, I think my receiver may be the issue, since I'm having cut out issue with my other ESC.