RC-Monster Forums - View Single Post - One-way diff for CRT.5?

GO-RIDE.com · 01.31.2008, 08:33 PM

I have the RCM Ext Chassis, so I don't really plan on going back to mech brakes. The electric brakes are really powerfull with my motor esc combo. It will actually lift the rear wheels off the ground. The track I drive is very high bite, so you don't need brakes too often, and most of the 10th scale 4X4 buggys run one-ways. Of course they also run a center slipper instead of a center diff, so that may make a difference.

I guess I could remove the front drive shaft for a quick test to see if the rear would be enough brakes?

	(#3)
GO-RIDE.com RC-Monster Carbon Fiber Offline Posts: 405 Join Date: Jun 2007	01.31.2008, 08:33 PM I have the RCM Ext Chassis, so I don't really plan on going back to mech brakes. The electric brakes are really powerfull with my motor esc combo. It will actually lift the rear wheels off the ground. The track I drive is very high bite, so you don't need brakes too often, and most of the 10th scale 4X4 buggys run one-ways. Of course they also run a center slipper instead of a center diff, so that may make a difference. I guess I could remove the front drive shaft for a quick test to see if the rear would be enough brakes? E-CRT.5 Monster - RCM chassis, MM/Medusa 50x3300/3s, truck tires, 1/8 shocks E-CRT.5 Stock - Sidewinder/4600/2s, buggy tires E-8ight - Tekin RX8 2000kv/4S E-8ight T- Tekin RX8 1700kv/5S