RC-Monster Forums - View Single Post

Arct1k · 02.01.2008, 03:08 PM

Came up with a different plan - Chopped off a set of traxxas pede/rustler mounts.

Dremelled a flat section (cutout) so they rest flat against the tower - with a lip.

Then drilled a 2.5mm hole through them and threaded a 3mm machine screw through it with a lock nut on the back.

For one of my hacks it actually looks pretty good!

	(#7)
Arct1k RC-Monster Mod Offline Posts: 6,597 Join Date: Apr 2007 Location: NJ	02.01.2008, 03:08 PM Came up with a different plan - Chopped off a set of traxxas pede/rustler mounts. Dremelled a flat section (cutout) so they rest flat against the tower - with a lip. Then drilled a 2.5mm hole through them and threaded a 3mm machine screw through it with a lock nut on the back. For one of my hacks it actually looks pretty good!