RC-Monster Forums - View Single Post - Cheapest 18.5v brushless setup on E-maxx

tashpop · 02.16.2008, 07:51 AM

looking in terms of cheap i think this will work.
mamba max esc
1 dewalt 36v battery= 5s2p a123
kb45 motor (you'll need 6mm pinions, or turn down the motor shaft)
or
feigao xl motor w/clamp and heatsink (will cost a little more)

is this the new emaxx or the old one? if its the old one, it will take more $$ to upgrade the drivetrain which truely is part of the conversion.

	(#2)
tashpop RC-Monster Aluminum Offline Posts: 641 Join Date: Aug 2007 Location: lake conroe area, tx	02.16.2008, 07:51 AM looking in terms of cheap i think this will work. mamba max esc 1 dewalt 36v battery= 5s2p a123 kb45 motor (you'll need 6mm pinions, or turn down the motor shaft) or feigao xl motor w/clamp and heatsink (will cost a little more) is this the new emaxx or the old one? if its the old one, it will take more $$ to upgrade the drivetrain which truely is part of the conversion. Current Projects CEN GST Mgm 22418 castle 1717 6s lipo Losi Aftershock Infinite 160a esc Motor Not sure yet