[tashpop]

i'm going to go on a limb here and say that won't be enough. just compairing my two setups i have. i've only metered my lsp which made just over 2hp running a hacker c50 L and compairing that to my emaxx running a kb45 on same voltage you're going after. the emaxx's power feels roughly twice as violent. its got to be putting out over 3hp. i notice a significant difference with lower capacity batteries on same voltage. its like i set a 50% training mode on the esc. and that setup is enough to heat up my mgm160, so i'm pretty sure i'm exceeding its amp ratings.

edit:
i miss read. i'm running 1/2 voltage as you'll be running, but still 44amps seems low.