Quote:
Originally Posted by lutach
It will come down to gearing too. My BPP with 10S geared the same as 6S with the 1521/1Y at close to it's rpm limit pulled 4760 watts. You might see 100A, 80A or 200A. If you use the 100A 12S controller with the 1527/1D, you might kill your controller. Might not happen on the first run, but it will happen soon. I think that's the reason my HV110 failed, but the Schulze 40.160 is still going as it can deliver that kind of power and more.
|
My 1527 is the 1.5D, which is only 1500 KV, so less then even my 1521 which is 1900 KV. The 1D motors are amp hogs and draw 200A's. I don't care for those motors...