High speed buggy project......

[jzemaxx]

Originally Posted by lutach

It will come down to gearing too. My BPP with 10S geared the same as 6S with the 1521/1Y at close to it's rpm limit pulled 4760 watts. You might see 100A, 80A or 200A. If you use the 100A 12S controller with the 1527/1D, you might kill your controller. Might not happen on the first run, but it will happen soon. I think that's the reason my HV110 failed, but the Schulze 40.160 is still going as it can deliver that kind of power and more.

My 1527 is the 1.5D, which is only 1500 KV, so less then even my 1521 which is 1900 KV. The 1D motors are amp hogs and draw 200A's. I don't care for those motors...