RC-Monster Forums - View Single Post - Take guesses on why my trucks got the twitches?

BrianG · 07.26.2008, 11:09 PM

On the radio: Set the throttle trim to 0. Set the EPA to as high as it can go for both forward and reverse.

On the ESC: Set the the "noise cancel" setting to "off" and the "neutral range" setting to "normal 1".

Recalibrate the radio and ESC together.

I've used two Quark systems both with Spektrum systems and they worked perfectly. Once you get your system running right, you might want to set the "neutral range" to "narrow" for the best slow speed control.

	(#12)
BrianG RC-Monster Admin Offline Posts: 14,609 Join Date: Nov 2005 Location: Des Moines, IA	07.26.2008, 11:09 PM On the radio: Set the throttle trim to 0. Set the EPA to as high as it can go for both forward and reverse. On the ESC: Set the the "noise cancel" setting to "off" and the "neutral range" setting to "normal 1". Recalibrate the radio and ESC together. I've used two Quark systems both with Spektrum systems and they worked perfectly. Once you get your system running right, you might want to set the "neutral range" to "narrow" for the best slow speed control.