Quote:
Originally Posted by George16
Slipperential for the revo or emaxx.
|
I am basically doing this with my 1/8 scale diff for the new emaxx / erevo trans. Or do you want an exposed gear style slipperential like Mike used to make? I will stick to what I am doing, don't want to make something that is already in the works! Plus the slipperential is one of Mike's designs, and I am not into copying...
Quote:
Originally Posted by JThiessen
I think one other thing that we really need is a good slipper system that can be used on multiple vehicle types, now that Strobe is no longer in business. For my personal needs, I'd like to be able to put the new Traxxas slipper on the old style emaxx tranny's. But I'm sure there are other manufactures slippers that I havent seen that might work as well.
|
Honestly, the revo spec slipper is the best I have seen. I was one of the first to put the revo slipper on the old emaxx tranny, but I did it with the gmaxx single speed and a nitro revo input shaft. I could give the new emaxx shaft a try in the old emaxx 2 speed tranny and see how that works. I have all of the parts. I will give it a try and report back.
Quote:
Originally Posted by satan'struck
i would say some good and nice mount for ESC and RECEIVER, also a TWO SPEED for the Xray XT8 if possible!
|
Which receiver and esc, and for what vehicle? I do not have an x-ray, but would an ofna 2 speed out of the gtp fit in the xray? What size bearings and output shafts does the xray center diff have? can you post a link to an online manual?
Quote:
Originally Posted by TexasSP
How about a good LST2 electric motor mount.
|
The dude is working on one right now. Not sure if you have seen it. It is a bit strange as it uses a disk in a mount that acts as an excentric to adjust gear mesh by turning the motor. I am sure that I could come up with something similar to Mike's revo design mount, and maybe have the Monster himself produce and sell it. Hell, he may already have something in the works, I will have to email him...