Looking for ideas, suggestions, etc...

[TexasSP]

How about a good LST2 electric motor mount.

[lincpimp]

Originally Posted by George16

Slipperential for the revo or emaxx.

I am basically doing this with my 1/8 scale diff for the new emaxx / erevo trans. Or do you want an exposed gear style slipperential like Mike used to make? I will stick to what I am doing, don't want to make something that is already in the works! Plus the slipperential is one of Mike's designs, and I am not into copying...

Originally Posted by JThiessen

I think one other thing that we really need is a good slipper system that can be used on multiple vehicle types, now that Strobe is no longer in business. For my personal needs, I'd like to be able to put the new Traxxas slipper on the old style emaxx tranny's. But I'm sure there are other manufactures slippers that I havent seen that might work as well.

Honestly, the revo spec slipper is the best I have seen. I was one of the first to put the revo slipper on the old emaxx tranny, but I did it with the gmaxx single speed and a nitro revo input shaft. I could give the new emaxx shaft a try in the old emaxx 2 speed tranny and see how that works. I have all of the parts. I will give it a try and report back.

Originally Posted by satan'struck

i would say some good and nice mount for ESC and RECEIVER, also a TWO SPEED for the Xray XT8 if possible!

Which receiver and esc, and for what vehicle? I do not have an x-ray, but would an ofna 2 speed out of the gtp fit in the xray? What size bearings and output shafts does the xray center diff have? can you post a link to an online manual?

Originally Posted by TexasSP

How about a good LST2 electric motor mount.

The dude is working on one right now. Not sure if you have seen it. It is a bit strange as it uses a disk in a mount that acts as an excentric to adjust gear mesh by turning the motor. I am sure that I could come up with something similar to Mike's revo design mount, and maybe have the Monster himself produce and sell it. Hell, he may already have something in the works, I will have to email him...

[satan'struck]

receiver is Futuba PCM 1024, and the ESC is MGM 16018...about the manual, i'll try to post the link for you, but if you didn't hear from me with a day or two, i guess the best place to look at is the Xray Web Site under manual (i believe they got the manual for the xt8), thanks alot!
P.S. i just checked and seems like you'll have to go to their site and look under downloads...

[lincpimp]

Originally Posted by satan'struck

receiver is Futuba PCM 1024, and the ESC is MGM 16018...about the manual, i'll try to post the link for you, but if you didn't hear from me with a day or two, i guess the best place to look at is the Xray Web Site under manual (i believe they got the manual for the xt8), thanks alot!

Ok, a good general purpose receiver box is the old nitro tmaxx box, howver the new erevo box looks great and it sealed. May not fit a big receiver though. I do have an mgm esc, and will look at it a bit to see how to mount it...

I will look into the xray 2 speed too.

[jayjay283]

Tower sent me 2 of those emaxx/erevo diffs, pretty sure I was only charhged for 1
, so send me the $3 ship 1s yours to laugh at but its goes in the tranny, not excited all,, Slipper !

[satan'struck]

hey lincpimp, thanks alot for all your help and will wait for your good new...oh, btw, if you got a rough idea, could you let me know how much are they and the S&H to Hong Kong if possible, thanks again, best regards, samsam...

[lincpimp]

Originally Posted by satan'struck

hey lincpimp, thanks alot for all your help and will wait for your good new...oh, btw, if you got a rough idea, could you let me know how much are they and the S&H to Hong Kong if possible, thanks again, best regards, samsam...

Sorry satan, not following you. What do you want a price on?