RC-Monster Forums - View Single Post

Metallover · 11.28.2008, 07:34 PM

Dont burn your hand with that motor! Or the Chassis!

I would keep a VERY close eye on the electronics when you are doing speed runs. It will draw a ton of amps and your electronics will run red hot. I'm also worried about your lipo. the mamba motor will probably work for speed runs, but the vendetta is a heavy car. That is the reason most people use 28mm/400 sized motors like the ammo and Neu. Make sure to have adequate cooling. If you are using the 1/10th sidewinder, the esc will probably be ok.

	(#17)
Metallover RC-Monster Spudgunner Offline Posts: 2,353 Join Date: Apr 2008 Location: South Dakota	11.28.2008, 07:34 PM Dont burn your hand with that motor! Or the Chassis! I would keep a VERY close eye on the electronics when you are doing speed runs. It will draw a ton of amps and your electronics will run red hot. I'm also worried about your lipo. the mamba motor will probably work for speed runs, but the vendetta is a heavy car. That is the reason most people use 28mm/400 sized motors like the ammo and Neu. Make sure to have adequate cooling. If you are using the 1/10th sidewinder, the esc will probably be ok.