Quote:
Originally Posted by BrianG
I'm impressed! 5Ah @ 235C would be 1175A continuous! I bet the voltage wouldn't drop at all at a mere 200A current draw. Of course, if you ran them that high, runtime would be a little over 15 seconds.   |
Yeah I did the math and figured the c rating was a bit high, but it is always nice to have some headroom... Plus you can charge them at 50c, so I need to make a deans to 220v ac adpater and just plug in the wall.
Quote:
Originally Posted by BL_RV0
Where do you find all these deals....???
|
As Arct1k said below... Stuff went quickly last night!!!
Quote:
Originally Posted by Arct1k
Flydma - i was all over that too but didn't realize you can remove the gearbox...
I did some research, the gearbox mounts up with screws. I have heard various things about how the pinion is held on (setscrew, and loctite) so we will have to see when I get the motor in. I already sold the gearbox... 70 bucks shipped. (I know, I suck). So I figure a neu 1515 for 80 bucks was not too bad... Almost makes that 235c lipo at 90 bucks seem overpriced.
There is still the 1506 if anyone has a crt.5 :)
|