Will the Castle 2200 be enough motor for a muggy?

[Arct1k]

Flydma - i was all over that too but didn't realize you can remove the gearbox...

There is still the 1506 if anyone has a crt.5 :)

[lincpimp]

Originally Posted by BrianG

I'm impressed! 5Ah @ 235C would be 1175A continuous! I bet the voltage wouldn't drop at all at a mere 200A current draw. Of course, if you ran them that high, runtime would be a little over 15 seconds.

Yeah I did the math and figured the c rating was a bit high, but it is always nice to have some headroom... Plus you can charge them at 50c, so I need to make a deans to 220v ac adpater and just plug in the wall.

Originally Posted by BL_RV0

Where do you find all these deals....???

As Arct1k said below... Stuff went quickly last night!!!

Originally Posted by Arct1k

Flydma - i was all over that too but didn't realize you can remove the gearbox...

I did some research, the gearbox mounts up with screws. I have heard various things about how the pinion is held on (setscrew, and loctite) so we will have to see when I get the motor in. I already sold the gearbox... 70 bucks shipped. (I know, I suck). So I figure a neu 1515 for 80 bucks was not too bad... Almost makes that 235c lipo at 90 bucks seem overpriced.

There is still the 1506 if anyone has a crt.5 :)