RC-Monster Forums - View Single Post

RC-Monster Mike · 04.29.2009, 09:30 AM

The spacing is 25.4mm or 1 inch on my 1700Kv truggy motor. My motor mounts have 25mm spacing, but use 3.3mm slots to accomodate 25mm or 25.4mm spacing. I was able to insert and remove the motor (with screws attached) through the back of my RC8T motor mount with no trouble. I wonder if both m3 sets of screw holes on your motor have the same spacing Jeff? There are 3 sets of holes(both of my m3 holes have the same spacing, but I haven't measured the m4 spacing).

	(#9)
RC-Monster Mike Site Owner Offline Posts: 4,915 Join Date: Nov 2004 Location: PA	04.29.2009, 09:30 AM The spacing is 25.4mm or 1 inch on my 1700Kv truggy motor. My motor mounts have 25mm spacing, but use 3.3mm slots to accomodate 25mm or 25.4mm spacing. I was able to insert and remove the motor (with screws attached) through the back of my RC8T motor mount with no trouble. I wonder if both m3 sets of screw holes on your motor have the same spacing Jeff? There are 3 sets of holes(both of my m3 holes have the same spacing, but I haven't measured the m4 spacing).