RC-Monster Forums - View Single Post - Brushless hpi baja rc-monster

thomatrix · 06:08 AM

Thanks. Just ordered two motors:

- 1x Neu 2215 750kv, smooth can, 8mm shaft
- 1x Neu 2215 480kv, smooth can, 8mm shaft

This will allow me to test both 8S, 10S and 12S setups.

I will try the Turnigy ESC and see how it performs using that. I pretty much have the batteries I need for 8S and 12S so I'll start with that.

To get a little scientific about it I have also ordered the 150A Eagle Tree eLogger with additional temp and rpm sensors.

	(#101)
thomatrix RC-Monster Carbon Fiber Offline Posts: 106 Join Date: Aug 2009 Location: Denmark	11.03.2009, 06:03 AM Thanks. Just ordered two motors: - 1x Neu 2215 750kv, smooth can, 8mm shaft - 1x Neu 2215 480kv, smooth can, 8mm shaft This will allow me to test both 8S, 10S and 12S setups. I will try the Turnigy ESC and see how it performs using that. I pretty much have the batteries I need for 8S and 12S so I'll start with that. To get a little scientific about it I have also ordered the 150A Eagle Tree eLogger with additional temp and rpm sensors. Last edited by thomatrix; 11.03.2009 at 06:08 AM.