Brushless hpi baja rc-monster

[thomatrix]

Thanks. Just ordered two motors:

- 1x Neu 2215 750kv, smooth can, 8mm shaft
- 1x Neu 2215 480kv, smooth can, 8mm shaft

This will allow me to test both 8S, 10S and 12S setups.

I will try the Turnigy ESC and see how it performs using that. I pretty much have the batteries I need for 8S and 12S so I'll start with that.

To get a little scientific about it I have also ordered the 150A Eagle Tree eLogger with additional temp and rpm sensors.