RC-Monster Forums - View Single Post - FLM Tranny Forward Brushless Conversion (FLM49000)

_dV · 10:47 PM

Many thanks.

Btw i meant from the base of the ESC to the base of the shock tower. Since you have a ruler in the pic though i figured out that distance is around 45mm which is what it is on my Flux now. My ESC used to be about 40mm from the base of the tower and it would get hit and the wires damaged on the occasional bad landing. No damage since i moved it, though i haven't done that many runs yet.

	(#49)
_dV RC-Monster Carbon Fiber Offline Posts: 233 Join Date: Sep 2009 Location: Australia	02.09.2010, 10:45 PM Many thanks. Btw i meant from the base of the ESC to the base of the shock tower. Since you have a ruler in the pic though i figured out that distance is around 45mm which is what it is on my Flux now. My ESC used to be about 40mm from the base of the tower and it would get hit and the wires damaged on the occasional bad landing. No damage since i moved it, though i haven't done that many runs yet. Last edited by _dV; 02.09.2010 at 10:47 PM.