View Single Post
Old
  (#11)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,935
Join Date: Aug 2007
Location: Slidell, LA
09.02.2010, 11:26 AM

I would ditch the axle extenders and run a wheel with more offset, just casue axle extenders are no replacement for longer arms... The higher offset wheel will put more load on the bearings, but you will loose a little bit of width and likely gain some steering and agility back. Stock flux is pretty short/narrow, so it should be agile and turn well. Trade off is that the longer chassis should be more stable.
   
Reply With Quote