RC-Monster Forums - View Single Post

E-Revonut · 02.10.2011, 07:58 PM

Nice job linc but I have one question. Wouldn't it have been easier to modify the cvd shaft? Cut the shaft and take out a piece 6mm and then get some tubing that has an ID the same as the OD of the shaft and weld it together. That should result in a shaft that is plenty strong and wouldn't have been much work

	(#9)
E-Revonut RC-Monster RC8T Offline Posts: 2,554 Join Date: Jan 2008 Location: Syracuse, New York (Camillus)	02.10.2011, 07:58 PM Nice job linc but I have one question. Wouldn't it have been easier to modify the cvd shaft? Cut the shaft and take out a piece 6mm and then get some tubing that has an ID the same as the OD of the shaft and weld it together. That should result in a shaft that is plenty strong and wouldn't have been much work RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah SC10 MMPro 13.5T 2s NeuEnery 5000mah RC18T Mamba 25/5400kv 2s lipo + 6s NiMh