Lst2 cvds and hubs on a Savage - RC-Monster Forums

E-Revonut · 02.10.2011, 07:58 PM

Nice job linc but I have one question. Wouldn't it have been easier to modify the cvd shaft? Cut the shaft and take out a piece 6mm and then get some tubing that has an ID the same as the OD of the shaft and weld it together. That should result in a shaft that is plenty strong and wouldn't have been much work

lincpimp · 02.10.2011, 11:29 PM

Quote:

Originally Posted by E-Revonut

Nice job linc but I have one question. Wouldn't it have been easier to modify the cvd shaft? Cut the shaft and take out a piece 6mm and then get some tubing that has an ID the same as the OD of the shaft and weld it together. That should result in a shaft that is plenty strong and wouldn't have been much work

Yes, being a welder this would have been alot easier for me.

However I want as amany off the shelf items as possible. And the cvds are a wear item, the braces should last the life of the truck.

_paralyzed_ · 02.11.2011, 09:28 AM

Quote:

Originally Posted by lincpimp

Yes, being a welder this would have been alot easier for me.

However I want as amany off the shelf items as possible. And the cvds are a wear item, the braces should last the life of the truck.

I wish your post number would stay with your post. This right here Linc, is post 11,111. You're a super star!