RC-Monster Forums - View Single Post - simplechamp's first scaler build

simplechamp · 06.20.2011, 08:15 PM

Today I 4-linked the rear end of my SCX10. Used the Axial truss with Delrin links and RC4WD plastic rod ends. I made the links 2mm longer to adjust the pinion angle upward a little bit. Going to 4-link the front in the next few days with the same setup.

I also swapped out the cheapy Blue Bird servo for a Spektrum S6030 (278 oz-in, 0.15 sec). Tested the servo using the Sidewinder internal BEC, but will be installing a Castle 10A external BEC tonight.

	(#5)
simplechamp RC-Monster Titanium Offline Posts: 1,884 Join Date: Jul 2009	06.20.2011, 08:15 PM Today I 4-linked the rear end of my SCX10. Used the Axial truss with Delrin links and RC4WD plastic rod ends. I made the links 2mm longer to adjust the pinion angle upward a little bit. Going to 4-link the front in the next few days with the same setup. I also swapped out the cheapy Blue Bird servo for a Spektrum S6030 (278 oz-in, 0.15 sec). Tested the servo using the Sidewinder internal BEC, but will be installing a Castle 10A external BEC tonight. Caster Fusion F8T - Serpent 811Be - Jammin X2 carbon e-GT conversion - Axial SCX10