RC-Monster Forums - View Single Post

J57ltr · 01.12.2012, 12:14 PM

I have brought back many A123 cells. In fact I have 2 2S2P packs that each had a set of DEAD cells I bought off of ebay a couple of years ago and they are still good today. I start by charging them as a Nimh 1 cell at about .1A then when the voltage starts to come up I will switch to a 2 cell Nimh at the same current. Once the voltage gets to 2.5 or so then I charge them as a normal LiFe cell at the same current till done. Just don't walk away and watch them and you will be fine.

Jeff

	(#6)
J57ltr RC-Monster Aluminum Offline Posts: 610 Join Date: Feb 2009 Location: Tomball/ Houston Tx.	01.12.2012, 12:14 PM I have brought back many A123 cells. In fact I have 2 2S2P packs that each had a set of DEAD cells I bought off of ebay a couple of years ago and they are still good today. I start by charging them as a Nimh 1 cell at about .1A then when the voltage starts to come up I will switch to a 2 cell Nimh at the same current. Once the voltage gets to 2.5 or so then I charge them as a normal LiFe cell at the same current till done. Just don't walk away and watch them and you will be fine. Jeff The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.