|
01.12.2012, 12:14 PM
I have brought back many A123 cells. In fact I have 2 2S2P packs that each had a set of DEAD cells I bought off of ebay a couple of years ago and they are still good today. I start by charging them as a Nimh 1 cell at about .1A then when the voltage starts to come up I will switch to a 2 cell Nimh at the same current. Once the voltage gets to 2.5 or so then I charge them as a normal LiFe cell at the same current till done. Just don't walk away and watch them and you will be fine.
Jeff
The Warnings & Cautions discussed in this manual cant cover all possible conditions/situations. It must be understood that common sense and caution are factors which cant be built into this product.
|
Threaded Mode
