RC-Monster Forums - View Single Post

Serum · 01:28 PM

You need a meter that is capable of measuring VERY low resistance.

But if you just want to test the motor you can shorten any of the 3 wires. If you shorten one on one, you will feel a jumping resistance while turning the shaft. If you short all three of them, you feel a consistent resistance when you turn the shaft.

	(#2)
Serum RC-Monster Admin Offline Posts: 10,480 Join Date: Feb 2005	09.30.2006, 01:27 PM You need a meter that is capable of measuring VERY low resistance. But if you just want to test the motor you can shorten any of the 3 wires. If you shorten one on one, you will feel a jumping resistance while turning the shaft. If you short all three of them, you feel a consistent resistance when you turn the shaft. Last edited by Serum; 09.30.2006 at 01:28 PM.