Quote:
|
Originally Posted by elegal
2. I am almost done converting a LSP-R to brushless, and am going to get two trakpower 4900 batteries. Can I stack these in the same mount on top of each other, or will I have overheating issues with the packs? Also, does anyone have a pic of the setup to use when balancing these packs?
|
No, they can't be stacked because the connector terminals are located on top of the packs. You'd have to have them offset by about 1/2" to be able to plug the 4mm connectors in both.
Quote:
|
Originally Posted by elegal
3. Assuming I buy two trakpowers, can I use the Flightpower V-Balancer to balance both trakpowers at the same time (would be like one 4S pack)? I also want to be able to balance the Apogee packs, so would it be easier to use the trakpower adaptor for the V-balancer (to balance the trakpowers) and use the taps that come with the V-Balance to balance the apogee packs?
|
No, you need an adapter specific to the Trakpowers. If you don't have a V-Balance already, you can buy a version that comes with the Trakpower adapter included. It will also charge their standard Flightpower Lipos with the proper harnesses. Also, it's $5 cheaper than the standard V-Balance and then you don't need the $7 adapter harness for the Trakpowers. If you plan to order Trakpowers, speak with a gentleman named Jack at Duralite...very helpful guy and will make sure you get what you need.