 |
|
|
|
 |
 |
Mamba Max and firmware version 1.20 |
 |
|
 |
|
(#1)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
Mamba Max and firmware version 1.20 -
11.02.2008, 08:35 AM
Is it me or is the start up on the MM also improved due to the update like the MMM? My EMaxx starts up going forward every time now and slow speed is smooth. Excellent work by Patrick and the CC gang. Thanks!
|
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
11.02.2008, 10:06 AM
IIRC they use the same "brians" chip...
____________________________ I rechecked I think they might be different I think the MM uses an F320 and the MMM and F310 - But makes sense that the optimisation from one went into all. This is the beauty of CC's design. |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
11.02.2008, 10:28 AM
Aaaah. That makes sense. Thanks.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 81
Join Date: May 2008
|
11.02.2008, 11:03 AM
Man I did not even realize there was an update and neither did my Castle Link software. I just downloaded and installed the newest version and updated to firmware v1.20. Thanks for the heads up, I am all anxious to go give it a try now.
Powered by Mamba 5700 |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 81
Join Date: May 2008
|
11.02.2008, 11:49 AM
Just ran a pack with the new firmware update and it does start up smoother and the throttle control just seemed improved to me.
I just read the release notes and it says all the added alerts are for the Monster Mamba Max so I am curious if those added alerts and fixes mentioned in the release notes also apply to the Mamba Max? Powered by Mamba 5700 |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
A Horse's Ass
Offline
Posts: 1,065
Join Date: Oct 2007
Location: Spokane WA
|
11.02.2008, 12:00 PM
I'll have to break out the Novak HV4.5 motor again and see how it does now. Had problems with it starting from a stop previously. The last time cc had a big firmware upgrade. It improved how the mm and a sensored motor worked together.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
11.02.2008, 04:38 PM
Just got back from running the EMaxx a good 20 - 30 minutes. Man, gotta love V 1.20.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
|
RC-Monster Admin
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
|
11.02.2008, 04:41 PM
Quote:
|
|
  |
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
2010 Texas Worlds Top Fuel and Outlaw 10.5 Champ
Offline
Posts: 396
Join Date: Apr 2008
|
11.02.2008, 05:07 PM
Is it a cow chip, brian?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Brushless
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
|
11.02.2008, 05:12 PM
Sweet, didn't think the MM would be smoother aswell
MMM V1 w/1.20 Airtronics MX3 2.4Ghz TP 5S 5000mah Neu 2.5D/F |
|
|
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
That's All Folks!
Offline
Posts: 2,359
Join Date: Dec 2006
Location: in a VAN down by the RIVER
|
11.02.2008, 06:29 PM
I think it was good for all of them, just put 1.20 on my mamba micro pro.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
11.03.2008, 01:03 AM
I flashed 3 MM today and tested the rollback problem the MM has and it was still there. Will try the sensored motor next time.
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
