HW 150a baseline settings

[truggyracer1]

ok....big race tomorrow i have the 150a HW esc in my truggy and i'm looking for a base line setting the specs are medusa 2300kv motor 13t pinion,46 tooth spur,43/10 gearing and 2 2s 7.4 5000mah lipos i have the program card so i can easily set the ESC just need a good baseline! i hear that the medusas like to be set at 15 degrees timing i was going to set the lipo cutoff at 3.2 volts as far as drag brake and brakes and what not need suggestions......thanks in advance!!!