Maximum minutes on the MMM

[RBMike]

Hey guys we are hearing all the stories about how the MMM's have died. I was wondering how many minutes of run time people have put on their MMM's. I'm assumming some of you guys who's did not break should have racked up some hours now.

Mine went over 90 minutes the first time, less that an hour the second so I'll say:

"140 minutes with 2 failures"

What about you guys?

[DRIFT_BUGGY]

15 minutes no failure. Will be able to test it out this Wednesday at my local track and hopefully get alot more out of it. Was those 2 140min failures using the internal bec?

[phatmonk]

40 minutes on the 1st,25 minutes on the 2nd and 45 minutes on the 1st after it had been repaired.Thats 2 controlers 3 failures.Iam going back to my MM with a bec.This has become a huge pain in my wallet.CC has though been great to try to fix the problem.

[rabosi]

I have 3+ hours total on mine. Mix of 60+ speed runs and lots of grass/dirt 40+. Grass over 3 inches.

[George16]

I have over 2 hours on mine. Most are just speed runs on asphalt and some on newlymowed grass.

2 hours and 40 minutes with 4s 4000 mah, 8XL feigao and external BEC. It still work but don't know when it will die.

[MTBikerTim]

I think I got about 3 or 4 minutes on mine after being fixed and dying twice but I really don't see the point in this thread. Castle will get it sorted. This is just scaring people. I just bought a Micro Pro as I have had it with my coging Quark 33a Pro car. The 4 minutes driving with the MMM showed me what smooth really was.

[joeling]

so far,

1) 15 minutes light running a track
2) 1hr+ hard running around track with external bec & fan powered off that mod
3) 10-15 minutes hard running until the buggy got broke. Monster is ok

Regards,
Joe Ling

[bruce750i]

2-3 hours 4s & 6s internal bec, same fan no mods. Also blew a 8xl motor with it on 6s, And its still kicking.

[RBMike]

Originally Posted by MTBikerTim

I think I got about 3 or 4 minutes on mine after being fixed and dying twice but I really don't see the point in this thread. Castle will get it sorted. This is just scaring people. I just bought a Micro Pro as I have had it with my coging Quark 33a Pro car. The 4 minutes driving with the MMM showed me what smooth really was.

Tim, the point of the thread is to see how much run time people have on "the Good ones". It will give us a better over all veiw of the situation. People tell me "mine is working fine" the I ask how much it's been run & normally what they tell me is less time than what I got on mine before it failed. I'm not worried about Castle taking care of it, they have been outstanding thru this whole thing. I'm just trying to get a feel for how many people have say a few hours on it verses them telling me it works fine when they have only run it for a few minutes. Should'nt scare anyone? Yes the MMM is supper smooth, I was considering a clutch until I used the MMM, now forget about it.

I have 8 race days on mine. that is 3, 5 min quals and 15min mains with a few 25 min mains (req battery swap) and 3 practice packs per race day. I also have 12 4s 5000 packs and 4 5s 4350 in my yard.
This is in a Losi 8ight with a Neu 1512 2.5d in it.
I don't understand why some work and some don't.

[RBMike]

So Badassrevo would you say about 500+ minutes?

Yes, and adding to it!! My fan only has three blades left on it, but everything elese is great.

[hootie7159]

about 32 hours of bashing/racing (which might as well be called bracing ) and working flawlessly (with fan mod and CC bec) and nothing broken....
8ight-t
Neu 2.5d/f
5s 4800mah elite lipo
16/48

[tc3_racer_001]

hootie, thats a crazy amount of time. think yours is working for good! ill buy it :D