RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > General Electric

Reply
 
Thread Tools Rate Thread Display Modes
charging 2 7c packs on eos 0606i
Old
  (#1)
starscream27
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Jun 2008
charging 2 7c packs on eos 0606i - 07.14.2008, 09:17 PM

Hi,
I bought the eos0606i to charge my 2 7c elite 5000mah NiMh packs. I'm running them on a Y connecter and the first charge seemed to go well but took a while. so on my next charge i decided to charge them one at a time. this took longer . So now needless to say i'm going to be charging both packs at the same time from now on. Which brings me to my question, seeing as how i charged the batts olny once one at a time would it be safe to charge them both at the same time again? Just looking for a little reassurance.
Thanks
   
Reply With Quote
Old
  (#2)
azjc
Guest
 
Posts: n/a
07.15.2008, 03:30 AM

Quote:
Originally Posted by starscream27 View Post
Hi,
I bought the eos0606i to charge my 2 7c elite 5000mah NiMh packs. I'm running them on a Y connecter and the first charge seemed to go well but took a while. so on my next charge i decided to charge them one at a time. this took longer . So now needless to say i'm going to be charging both packs at the same time from now on. Which brings me to my question, seeing as how i charged the batts olny once one at a time would it be safe to charge them both at the same time again? Just looking for a little reassurance.
Thanks
what is the voltage of the packs?
   
Reply With Quote
Old
  (#3)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
07.15.2008, 03:41 AM

14 cells, so id imagine something like 1.4x 14.


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#4)
azjc
Guest
 
Posts: n/a
07.15.2008, 04:04 AM

I didnt pay any attention to the NiMH....ooops its been a long time since I have charged a Nimh pack
   
Reply With Quote
Old
  (#5)
starscream27
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Jun 2008
07.15.2008, 11:52 AM

They are 8.4V packs. 16.8 total.
   
Reply With Quote
Old
  (#6)
starscream27
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Jun 2008
07.15.2008, 11:53 AM

Quote:
Originally Posted by tc3_racer_001 View Post
14 cells, so id imagine something like 1.4x 14.
E-savage.com member??
   
Reply With Quote
Old
  (#7)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
07.15.2008, 05:20 PM

esavageforme :)

yep. sold it, but i still try and help you guys out. it was a great truck, no good for racing though. moved onto a buggy :)


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#8)
hoober
RC-Monster Carbon Fiber
 
Offline
Posts: 174
Join Date: Dec 2007
07.15.2008, 05:24 PM

If the batts will require the same amount of charge then it's ok to do them together as 1 pack in series.
   
Reply With Quote
Old
  (#9)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
07.15.2008, 05:28 PM

to charge them effectively they have to be both exactly the same (matched together, with similar specs) and be run down equally (ubec rather than the esc etc). apart from that, it should be fine BUT: i wouldnt recommend charging them up full. charge them for 80% of the time (dont think tcs works for nimh) then charge individually. this ensures one isnt overcharged and destroyed.

hope this helps,
ryan.


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Old
  (#10)
starscream27
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Jun 2008
07.15.2008, 08:26 PM

Thanks for the help guys.
I sold my e-sav as well was getting married. I got an e-revo for a wedding present tho so the madness begins new
   
Reply With Quote
Old
  (#11)
tc3_racer_001
RC-Monster Carbon FIBRE NOT FIBER!
 
tc3_racer_001's Avatar
 
Offline
Posts: 701
Join Date: Apr 2008
Location: Brisbane, Australia
07.16.2008, 12:28 AM

hey, your the one who sold me those a123 batteries :)

havent really used them, but one of the cells seems a bit weak but should be fine (gets stuck at a lower voltage)

good luck keeping the revo :D


hyper 8.5 pro SOLD!
Monster Max Still Working...
JR SX3
Neu 1512 2D/S
12t pinion
4800 zippy-r


XRAY xt8
MMM
Neu 1512 3D/F
11t pinion
6s 5000 Flightmax/ 4s 4000 Turningy
  Send a message via MSN to tc3_racer_001  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com