I'm pissed!

[whitrzac]

I bought a MM5700 motor about 2 weeks ago, ran 2 8cell nimh 3300 packs, I was geared a little high so temps were 170* and this happens, I threw out the receipt by accident and now CC says that they wont warranty it!!!!!

the only way that this could happen on an new motor is a manufacturing defect

[t-maxxracer32]

you ran it at 16 cells?
or 2 different runs with the 8 cells?

i had the same problem with one of my mm motors...

luckily castle replaces them pretty cheap..

[whitrzac]

2 diffrent runs on 8 cells, I just bought a NEW still sealed 4600 for $52(rctech), it cost $45+$5 shipping to send it to castle

[MetalMan]

So then I guess the lesson learned is to keep receipts at least until the warranty period expires?

Why can't you contact the place you bought it and have them reprint your invoice?

[whitrzac]

Originally Posted by Electric Dave

Why can't you contact the place you bought it and have them reprint your invoice?

I'm in the process of doing that, but it was at my LHS, and there not so good record keepers :(

[hoovhartid]

Originally Posted by whitrzac

I'm in the process of doing that, but it was at my LHS, and there not so good record keepers :(

well they should know you bought it recently and at least be able to get you a reciept with a date "close" to your purchase date. It would be a good move for them considering you chose to support them over someone on the internet. (which would have probably been cheaper for you and you'd would have a digital receipt saved on your computer)

[emaxxnitro]

yeah buying off the i-net has its adv. but i still like to support my lhs when i can. castle should fix it for free

[lutach]

That's why I always say to wrap the rotor with Kevlar to prevent just that from happening.

[brushlessboy16]

or just buy a better motor.

[Unsullied_Spy]

Originally Posted by brushlessboy16

or just buy a better motor.

CC motors aren't that bad, I ran my 5700 to nearly 80k RPMs and the rotor is still intact. Just a fluke accident that will be replaced for free if he can find the receipt. Otherwise, IIRC, it's $40 to have the motor fixed.

[whitrzac]

Originally Posted by Unsullied_Spy

CC motors aren't that bad, I ran my 5700 to nearly 80k RPMs and the rotor is still intact. Just a fluke accident that will be replaced for free if he can find the receipt. Otherwise, IIRC, it's $40 to have the motor fixed.

no its $45 plus $5 shipping to get it there

[lincpimp]

Originally Posted by whitrzac

no its $45 plus $5 shipping to get it there

$50 bucks toward a medusa 50mm motor...

[Arct1k]

Looks like a classic rotor failure which is rare for CC - It is worth $5 to put it in the post...

[Unsullied_Spy]

Originally Posted by Arct1k

Looks like a classic rotor failure which is rare for CC - It is worth $5 to put it in the post...

If CC won't replace it though, lincpimp was on target about the Medusa. If CC will replace the motor it's worth doing but otherwise get a new motor.