 |
|
|
|
|
|
 |
 |
MAMBA Monster or ? |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 6
Join Date: Jan 2010
|
MAMBA Monster or ? -
03.01.2010, 01:53 PM
I have savage 25 with brushless conversion . 80A EZrun combo . I bought Turingy battery 4S 5000mAh and controller died . Now I need new one . I dont wont any chinese cheep ESCmore . So What can You suggest me wich ESC . I thought to Buy Mamba monster v3 controler from eBay ? Is there some better ESC and where I can buy it .?
Thanks in advance |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Mod
Offline
Posts: 6,597
Join Date: Apr 2007
Location: NJ
|
03.01.2010, 02:08 PM
RC-Monster.com is a good place to buy them :)
Its not just a forum its a SHOP with a forum ;) |
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 489
Join Date: Jul 2009
Location: maryland
|
03.01.2010, 02:09 PM
I ran the crap out of my mamba monster v3 last year.and i will again this year.i only had to replace the fan 1 time.if i were to do another conversion the mamba monster would be my choice again.going to put a mmp in my 1/16 revo
|
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
|
RC-Monster Brushless
Offline
Posts: 3,156
Join Date: Jul 2005
Location: Gramercy, LA
|
03.01.2010, 02:51 PM
Quote:
|
|
 |
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Dual Brushless
Offline
Posts: 4,236
Join Date: Dec 2007
Location: Cape Cod, Mass.
|
03.01.2010, 08:17 PM
it's the best forum for us rc addicts
2. MBX-5T 1520, MMM ON 5S 3. MBX-5 ONROAD CONVERSION 1515, MMM ON 5S 4. MRX-3 ON ROAD CONVERSION 1512, MMM ON 6S 5. TEN T 2650 T8, MMP ON 3S |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Aluminum
Offline
Posts: 704
Join Date: May 2008
|
03.01.2010, 08:57 PM
I'd go the Tekin RX8, the MMM has too high a failure rate, and failures in a dangerous manner for my taste.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
Something, anything, nothing
Offline
Posts: 2,747
Join Date: Mar 2006
Location: Houston, TX
|
03.01.2010, 09:08 PM
The MMM failure rate is no higher than the Tekin RX8. That is also with the V1 and V2, the V3 and beyond has a much lower failure rate.
The funny thing is you have no personal experience with the RX8 and seem to have a vendetta against CC. Get over it, if you are so happy with the 5B why keep beating the dead horse? The MMM is a solid controller, the RX8 is nice, but for the price difference not really worth it. The MMM is in no way unsafe and most of the failures are user error. FYI, I own Tekin controllers too, so I am in no way anti Tekin either. You should have been around a few years ago in BL, then you would actually know what a high failure rate is. |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
RC-Monster Aluminum
Offline
Posts: 944
Join Date: Jan 2008
Location: huntsville, AL
|
03.01.2010, 09:58 PM
At our local track, the Tekin's have burned up alot more often then the MMM's. Part of the reason why I stuck with the MMM.
Revo 3.3 BL- 1515 1Y Mugen MBX6 NEU/MMM Mugen MBX6-T NEU/MMM Losi LST2.0 MT NEU/MMM Losi 8T RTR 2.0 NEU/MMM Losi 8T 2.0 NEU/MMM Losi 8B-E 2.0 NEU/MMM |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 269
Join Date: Dec 2005
|
03.02.2010, 12:18 AM
3 mmm's, and 2 hw 80 amp esc's here. No complaints here with any of them, I would def pick the mmm for the savage though. The hw 150 would probably be fine, but for that price you could pretty much pick up a mmm.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 471
Join Date: Feb 2010
|
03.02.2010, 05:19 AM
A MMM with a 1520 1600 kV on 5-6S would be great for your monster truck ! You need torque motor ;)
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
