Evader

[toby]

My friend wants a cheap but nice BL setup for his evader, he also wants to know some good but cheap hop ups

[squeeforever]

i would recommend getting something else to put brushless in because im not sure if the tranny would hold up.

[toby]

he already has the Evader though

[squeeforever]

true, but i dont think it will even hold up to brushless so i dont think it would be wise. im not positive though.

[crazyjr]

It should, its a Losi XXT in disguise.

[Z06jim]

I just did this.

All the Aluminum parts I could buy for the Evader.

feigao 8s, mgm120(overkill)
fun on 2s lipo, insane on 3s lipo
Killed 2 diff gears, one spur gear till I tighted everything tighter than I thought it should be.

~35mph on 2s lipo and should last a while.
~50mph on 3s but can't keep it on the ground.
Working on a front spoiler. Had to remove rear wing, drag pulls the front off the ground.

[nitrostarter]

i killed 2 diffs gears and fried a slipper plate on my frie'ds evader with a Novak 5800 before he took it back from me.

[JOHNNYMAXXIMA]

Originally posted by Z06jim

~35mph on 2s lipo and should last a while.
~50mph on 3s but can't keep it on the ground.

Think it could beat your Z06 to 50? :D

[toby]

so it is possible but definatley going to cost him at least 500 toget it going good

[Z06jim]

With the motor and controller, anything cost $500

Just put $300 into a RC18T
Expect to put ~1000 into E-Maxx

Speed cost money, how fast do you want to go?


Yes,
0-50 2.0 sec Evader
0-50 3.2 sec Z06
Power to weight ratios do matter!:cool:

Somewhere I saw a metal diff gear and idler gear for the XXT. It will fit the evader. Let me see if I san find it.....

[squeeforever]

BL_Force- how do you like your miniquake se with the brushless?

[riverat1540]

i have a brushless evader or had one until by bro drove it in the creek. it was very squirly and hard to control and did about 40 with a novak gtp and velocity 5.5 never had a drive train problem but i added aluminum idler carbide diff and trust balls, associated diff and rings and a rear tow block brace. now that my novak fried i just ordered a mamba max esc and im gonna put a Feigao 380C Sensorless Brushless Motor. and ill run a 6cell
IB4200 pack until i can afford a 3s lipo

[riverat1540]

here are some pics of my evader