6s setup for 1/16 summit?

[speedy]

What do you guy's think of this setupnfor a 1/16 summit?

Mm-pro + 6s + 1500ish kv motor geared for 45mph would that be an good
setup?how long runtimes could i get?


Fore lipo,s i was thinking of using a pair of 1000mah 3s 30-45c packs to save some weight compared to the 1500mah 3s pack that i run now wth thecstoch setup !

[scarletboa]

i like the idea a lot. the only problem is finding a good, 1300-1800kv motor (preferably 4 pole)

good luck with the build and pics, as always, are expected

[speedy]

How about a mega 16/25/motor they have 6poles ?

If i whant an outrunner that has equal or sligtlyå more tourque than a inrunner in stock motor size ! How big does the outrunner have to be?

[E-Revonut]

Good luck having the diffs hold up! The diffs are worse than the full size revos, I was blowing apart diffs on 2s after a few runs and on 3s I was lucky to have a diff last for more than an hour

[Semi Pro]

Originally Posted by E-Revonut

Good luck having the diffs hold up! The diffs are worse than the full size revos, I was blowing apart diffs on 2s after a few runs and on 3s I was lucky to have a diff last for more than an hour

my diffs held up fine to the cm36 7700 on 3cell lipo and mikey84's diffs are holding up fine to the cm36 9000kv on 3cell so i think it really depends on the way you set up your diffs and how you drive it.

i