 |
|
|
|
|
|
 |
 |
Help with Revo |
 |
|
 |
|
(#1)
|
|
RC-Monster Stock
Offline
Posts: 3
Join Date: Oct 2008
|
Help with Revo -
05.04.2009, 12:48 PM
i currently have the Tecko convertion in my 3.3 and was running an 8xl,i just bought the MMM-2200 setup and it wont fit the mount(to big around)can anyone tell me if the RC-Monster mount will work with the 2200 motor?if so what gearing should i run?I am thinking centre diff and rear brake setup as well
thanks |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 123
Join Date: Mar 2009
Location: Michigan
|
05.04.2009, 04:02 PM
yes, the rc monster motor mount will work with the 2200kv motor. thats what im using.
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
i pwn nitro
Offline
Posts: 769
Join Date: Nov 2008
Location: with ur GF
|
05.04.2009, 04:57 PM
have you beefed up the driveline?
ya know..things like locked it into 2nd gear and removed 1st, E-revo diffs and steel center driveshafts etc? yeah the RC-monster mount will work shaun the porthole from the noob world an here has been opened!! that's how i got in. |
 |
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
RC-Monster Stock
Offline
Posts: 3
Join Date: Oct 2008
|
05.05.2009, 07:30 AM
[QUOTE=shaunjohnson;284471]have you beefed up the driveline?
ya know..things like locked it into 2nd gear and removed 1st, E-revo diffs and steel center driveshafts etc? yeah the RC-monster mount will work shaun[/QUOTE the tranny is locked into 2nd,i have cvds all around and in the middle,i didnt know about the diffs though.thank for informing me of that. I am switching over from the tecko kit so i wont be using the clutch bell any more.so what is a good gearing to start with?I will be racing not bashing so there will belots of 20-30 min mains and i want to keep her cool as i can and run somewhere around 30-35 mph my maxx is geared for 30 and stays nice and kool thanks for your help guys,i will order the mount now |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
i pwn nitro
Offline
Posts: 769
Join Date: Nov 2008
Location: with ur GF
|
05.05.2009, 07:56 AM
a racer like me then...
  get some E-revo diffs at the least, center diff with some really heavy weight diff oil (the nitro revo center diff is a little too weak for my taste) IMO i like what i have done and used a E-maxx 3905 tranny, loads stronger. use mikes.s gearing calculator (google "rc calculations") and one of the first few will have a top speed estimator thing. use that and gear your car for 40mph, that is almost garenteed to keep things cool enuff. i have mine geared for 40mph and my temps are never over 130 on the motor :) running 5s :)  good luck in beefing it up. shaun the porthole from the noob world an here has been opened!! that's how i got in. |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
RC-Monster Stock
Offline
Posts: 3
Join Date: Oct 2008
|
05.05.2009, 08:43 AM
Great thanks Shaun.Is the emaxx tranny a direct bolt in?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 123
Join Date: Mar 2009
Location: Michigan
|
05.05.2009, 03:36 PM
why do you put e-revo diffs in a revo conversion? are they stronger?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
Something, anything, nothing
Offline
Posts: 2,747
Join Date: Mar 2006
Location: Houston, TX
|
05.05.2009, 05:37 PM
Yes, they are stronger.
|
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Linear Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
