RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Stampede Dilemma
Old
  (#1)
Hernz
RC-Monster Stock
 
Offline
Posts: 17
Join Date: Oct 2005
Location: California
Stampede Dilemma - 06.27.2007, 06:19 PM

hey guys i just picked up a XL-5 Stampede on ebay for 145 shipped and looking to hook it up with a BL.

should i go:

Mamba Max ESC + MM5700

OR

Mamba Max ESC + Feigao

please advise
:043: :043: :043:
   
Reply With Quote
Old
  (#2)
E-Maxx King
Guest
 
Posts: n/a
06.27.2007, 06:22 PM

judt stick with the MM motors. How many cells?
   
Reply With Quote
Old
  (#3)
Hernz
RC-Monster Stock
 
Offline
Posts: 17
Join Date: Oct 2005
Location: California
06.27.2007, 06:27 PM

i'm planning on building the packs on my own, so i can do whatever would give me best runtime/power combo. any ideas?
   
Reply With Quote
Old
  (#4)
crazyjr
RC-Monster Dual Brushless
 
crazyjr's Avatar
 
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
06.27.2007, 10:32 PM

I would go with the 4600, I tryed the 5700 in a stampede and wasn't satisfied with the acceleration, the 4600 is better


Work because i gotta, play because i wanna

People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise
   
Reply With Quote
Old
  (#5)
AAngel
Guest
 
Posts: n/a
06.28.2007, 12:35 AM

crazy, you weren't satisfied with the acceleration? That's strange. I found the 5700 system on 3S lipo to be a virtual rocket.

I do, however, like the 4600 system the best. It is very flexible. You can go from 2S lipo to 4S lipo for a broad range of performance ranges.

Any MM system is going to put out more power than a stock pede can stand.
   
Reply With Quote
Old
  (#6)
Hernz
RC-Monster Stock
 
Offline
Posts: 17
Join Date: Oct 2005
Location: California
06.28.2007, 12:52 AM

if u guys were in my position would you wait for the VXL?

i didn't know it came with new upgrades!!!! :019:
   
Reply With Quote
Old
  (#7)
AAngel
Guest
 
Posts: n/a
06.28.2007, 12:59 AM

What, that Traxxas setup? Although my interest has been sparked by Traxxas' venture into the brushless market, I am a bit skeptical. I mean, they claim 70 mph on 3S lipo. Come on. I'm sure that they were able to make the system do it, but they're using a huge pinion. The 70 mph setup cannot be anything that you'd want to run for more than a couple of speed passes. Something's gotta get hot.

I do know that the MM systems have been around for awhile and I know them to be fast. VERY fast. If you take a 4600 system and run that on 4S lipo, I'd venture a guess and say that it will out do anything that the VXL system will do.

Of course, I could be wrong. No one's run a VXL system yet.
   
Reply With Quote
Old
  (#8)
Hernz
RC-Monster Stock
 
Offline
Posts: 17
Join Date: Oct 2005
Location: California
06.28.2007, 01:14 AM

i was referring to the upgraded chassis pieces

edit: and metal tranny gears?
   
Reply With Quote
Old
  (#9)
jnev
RC-Monster Brushless
 
jnev's Avatar
 
Offline
Posts: 2,864
Join Date: Jan 2007
Location: SoCal
06.28.2007, 01:32 AM

AAngel - there is actually a review on the VXL rustler, pede and bandit in the August issue of rc car action.

I'd stick to the Mamba Max motors. Either the 4600 on 3s or 5700 on 2s. Anyone have an idea which would run cooler?


   
Reply With Quote
Old
  (#10)
SpEEdyBL
"Out of spec" enthusiast
 
SpEEdyBL's Avatar
 
Offline
Posts: 820
Join Date: May 2005
06.28.2007, 02:40 AM

The 5700 most likely will still run cooler, but the 4600 will be much more powerful. The only reason why the 5700 will have less torque than the 4600 on the same cells is if you have crappy batteries that cannot supply the required current.


Check out my custom converted 8ight:
Sub 7lb, lowest CG of any 1/8 buggy

http://www.rc-monster.com/forum/show...894#post367894

Area 52 Ranch Raceway
T.R.C.R.
   
Reply With Quote
Old
  (#11)
crazyjr
RC-Monster Dual Brushless
 
crazyjr's Avatar
 
Offline
Posts: 3,794
Join Date: May 2005
Location: georgia
08.24.2007, 03:56 PM

Quote:
Originally Posted by AAngel View Post
crazy, you weren't satisfied with the acceleration? That's strange. I found the 5700 system on 3S lipo to be a virtual rocket.

I do, however, like the 4600 system the best. It is very flexible. You can go from 2S lipo to 4S lipo for a broad range of performance ranges.

Any MM system is going to put out more power than a stock pede can stand.
the Motor in question may be old, It was my first mamba max system and may have got hot a few times, But i geared it from 14 to 20/86 with stock stampede XL, revo type tires and it seemed to not run as fast as i thought it should. Actually it would go fast but acceleration was hampered somewhat. I put it in my HPI rs4MT (the electric one) and it run like it should. I never did run the 4600 in a stampede, so don't know about them


Work because i gotta, play because i wanna

People here hate Nitro, I love it. I start it, run it about 50 ft from me and it dies, I go after it. Perfect exercise

Last edited by crazyjr; 08.24.2007 at 04:00 PM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com