RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > GorillaMaxx

Reply
 
Thread Tools Rate Thread Display Modes
Two Videos of my G2R - Output shaft breaks at the end
Old
  (#1)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
Two Videos of my G2R - Output shaft breaks at the end - 10.24.2006, 10:22 PM

Both vids are of me driving around in front of my house.

First vid is of the last 4 minutes or so of my run, taken Monday afternoon. The packs dumped right after I turned the camera off (literally). I was using stock Talon tires off my Revo 2.5R, so I had horrible traction and handling. Camera was first placed on a curb and then moved to the trunk top of an G35 Coupe parked on my driveway lol.

Here is the first vid.

Second vid is the first 4 minutes of a run, taken this afternoon after recharging my packs. Right before the vid ends you will see 1/2 a wheelie and then hear a bunch of clicking. That was my output shaft going bye bye. Tires were CrimeFighter MTs. The camera was placed on the hood of a Dodge Ram parallel parked in front of my house lol (at least my tripods are stable :005: ).

Here is video number two

And here is picture of the broken ligthweight output shaft.

[URL=http://img93.imageshack.us/my.php?image=brokenshaftmq0.jpg][IMG]

Here is some general info.

First run was 12 minutes (second run cut short by breakage).

Motor Temp was about 85 degrees in both runs, with a high of 90.

Run was in 2nd gear 95% of the time.



Comments welcome - Enjoy! :018:


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#2)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
10.26.2006, 12:33 AM

Uhh...no one?


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#3)
smhertzog
Breaker of all that is Stock
 
smhertzog's Avatar
 
Offline
Posts: 195
Join Date: Mar 2006
Location: PA
10.26.2006, 07:28 AM

Quote:
Originally Posted by BP-Revo
Uhh...no one?
Dont call me no one:018:

Driving like that on the street without a body makes me nervous just watching:eek:

BTW nice video


Never fight an ugly man..... he has nothing to loose
   
Reply With Quote
Old
  (#4)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
10.26.2006, 10:33 AM

I haven't flipped it on the street yet *knock on wood*


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#5)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
10.26.2006, 10:48 AM

Wow, that output shaft looks like it was twisted right off. Is this the lightened shaft that comes with the FOC?

Off topic: Is this the same BP-Revo from the Trx forums?

EDIT Doh! Never mind. You said G2R, which implies emaxx tranny. No FOC in that!

Last edited by BrianG; 10.26.2006 at 10:49 AM.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#6)
neweuser
RC Monster, the Final Frontier
 
neweuser's Avatar
 
Offline
Posts: 3,379
Join Date: Feb 2006
Location: Minnesota
10.26.2006, 03:27 PM

Quote:
Originally Posted by BrianG
Wow, that output shaft looks like it was twisted right off. Is this the lightened shaft that comes with the FOC?

Off topic: Is this the same BP-Revo from the Trx forums?

EDIT Doh! Never mind. You said G2R, which implies emaxx tranny. No FOC in that!
It would be the same yes Brian!:027:

Wow, there was a lot of HARD braking there. I also noticed the Revo tips to the side a tad when you turn. I thought they handled better than the Emaxx? Mine does that too(gmaxx), but not as much if I lower my suspension a tad!
I really liked it though, it seemed smooth as butter! Good job!


"if you've got something to say, say it peacefully"

Last edited by neweuser; 10.26.2006 at 03:43 PM.
  Send a message via MSN to neweuser  
Reply With Quote
Old
  (#7)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
10.26.2006, 06:14 PM

The body roll is normal. The suspension is setup perfect.

It just drives a little wierd on road. On dirt, the back end usually kicks out a bit and it is actually handles better.

I'll have to get a vid of it on a track...cause that is what I built it for - and it handles beautifully it.

Yep - I'm BP from the Traxxas forums :)

As for the brakes, that was only about 1/2 brakes input on my controller, which has the brake EPA set down to 80% (out of 125%). Thats how much braking power I have on tap. Its rediculous.

Its an HV 6.5 too :D


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#8)
sjcrss
Hyper 7 Erevo Center Diff
 
sjcrss's Avatar
 
Offline
Posts: 1,195
Join Date: Dec 2005
Location: CNY (Syracuse/Binghampton area)
10.27.2006, 02:31 PM

pretty cool, Can't wait to see it on the track....some footage that is


Bl E-REVO
Quark 125b
Castle Creations-Neu 2200kv motor
((2s2p)(4s)
7800mah 7.4v Lipo Pack
E-Revo 1/8 scale Hyper 7 CD
http://www.rc-monster.com/forum/show...1&goto=newpost
  Send a message via MSN to sjcrss  
Reply With Quote
olé
Old
  (#9)
CHX MT PROD
Guest
 
Posts: n/a
olé - 11.09.2006, 03:59 PM

Good machine,but you need a cameraman,and a nicer spot...

yeaaaa
   
Reply With Quote
Old
  (#10)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
11.10.2006, 11:59 AM

A nicer spot?

That was just a quick vid in front of my house...obviously the street isn't useful for anything except wheelies and speed runs.

Plus...that is my race truck...no way I'm taking it to a hardcore offroad bash site...


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Old
  (#11)
smhertzog
Breaker of all that is Stock
 
smhertzog's Avatar
 
Offline
Posts: 195
Join Date: Mar 2006
Location: PA
11.10.2006, 07:22 PM

The Gorillamax g-2 that I have has taken some pretty sound thrashings, I didnt break or bend a single thing during any of the crashes in this video. http://video.google.com/videoplay?do...63129353136429
The G-3 Revo platform has a lot in common with the G-3 so short of running into a brick wall at 30 mph you dont have much to worry about.:018: Whip it beat it make it bleed brushless power is all you need.:018: :018: :018:


Never fight an ugly man..... he has nothing to loose
   
Reply With Quote
Old
  (#12)
nbcaznmaster
RC-Monster Cult Member
 
nbcaznmaster's Avatar
 
Offline
Posts: 1,439
Join Date: Jun 2005
11.10.2006, 11:07 PM

Quote:
Originally Posted by BP-Revo
Its an HV 6.5 too :D
Thats why it seemed slow! Also, nice vid sm. Its a nice change from teh reg speed runs (no offense bp). You bash it like its nitro, sadly i dont ahve teh balls for taht.
  Send a message via AIM to nbcaznmaster  
Reply With Quote
Old
  (#13)
BP-Revo
BMW M Power!
 
BP-Revo's Avatar
 
Offline
Posts: 1,910
Join Date: Jan 2006
Location: SoCal
11.11.2006, 08:07 PM

No offense taken. That was some messing around in front of my house. Normally I'm driving like a maniac. I also do take it a little easy on the G2R...its my baby lol. I do unleash it when I hit the track though. So far nothing can touch me.


BL Revo: CF G2R, LMT1940/7, 6S FP 30C Lipos, MMM, Hitec 5955TG
CRT .5: 7075 Ext Chassis, LMT1930/7, FP 25C 3S Lipos, MM
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com