 |
|
|
|
 |
|
|
 |
new tekin SC4X motors. |
 |
|
 |
|
(#1)
|
|
I'm obsessed with The Office
Offline
Posts: 908
Join Date: Feb 2008
|
new tekin SC4X motors. -
06.19.2010, 08:31 PM
does anyone know if these are 2 pole or 4 pole?
8IGHT-T 2.0 2350KV MONSTER MAMBA LOSI TEN SCTE NOVAK 3700 MMP B44 MMP TRINITY D3 6T B4 MMP TRINITY D3 9.5 E-REVO BRUSHLESS EDITION |
|
|
|
 |
 |
 |
|
|
|
|
|
|
(#2)
|
|
Can't catch this...
Offline
Posts: 1,142
Join Date: Oct 2008
Location: baraboo, WI
|
06.19.2010, 11:17 PM
I'm 99% sure that they are 2 pole
|
|
|
|
|
|
|
|
|
|
|
|
|
(#3)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
06.20.2010, 12:11 AM
It is a 2 pole 3 slot motor. It will have adjustable timing with a smaller range than the standard 1/10 motors.
4.5 is around 5000kv, 5.5 is around 4000kv. GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
|
|
|
|
|
|
(#4)
|
|
I'm obsessed with The Office
Offline
Posts: 908
Join Date: Feb 2008
|
06.20.2010, 07:00 PM
thanks guys
8IGHT-T 2.0 2350KV MONSTER MAMBA LOSI TEN SCTE NOVAK 3700 MMP B44 MMP TRINITY D3 6T B4 MMP TRINITY D3 9.5 E-REVO BRUSHLESS EDITION |
|
|
|
|
|
|
|
|
|
|
|
|
(#5)
|
|
RC-Monster Stock
Offline
Posts: 30
Join Date: Mar 2009
Location: Denmark
|
06.24.2010, 12:55 PM
Is there a sensor cable with it??
Anyone know??? Brushless Slash Brushless Scrt10 Brushless Mb4 |
|
|
|
|
|
|
|
|
|
|
|
|
(#6)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
06.24.2010, 03:02 PM
I would think so, as my RX8 sytems came with a cable.
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
|
|
|
|
|
|
(#7)
|
|
RC-Monster Stock
Offline
Posts: 30
Join Date: Mar 2009
Location: Denmark
|
06.24.2010, 04:06 PM
Okay, the places I have looked, it says nothing about it is with
So I hope it is with. Are only waiting for it comes, it is pre-ordered Brushless Slash Brushless Scrt10 Brushless Mb4 |
|
|
|
|
|
|
|
|
|
|
|
|
(#8)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
06.24.2010, 04:09 PM
Now that I'm thinking about it, my 1400kv 1/8 motor which was purchased seperatly didn't come with a cable.
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
|
|
|
|
|
|
(#9)
|
|
RC-Monster Titanium
Offline
Posts: 1,884
Join Date: Jul 2009
|
06.24.2010, 10:15 PM
For anyone from Tekin: are there any plans to release lower kv winds in the future?
|
|
|
|
|
|
|
|
|
|
|
|
|
(#10)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 235
Join Date: Feb 2009
Location: California
|
08.11.2010, 10:59 PM
We are considering lower kv's but we'd need a good reason to make them.
This motor should have a cable in the box. All of our sensor cables are underneath the foam in the package. |
 |
|
|
|
|
|
|
|
|
|
|
(#11)
|
|
2 KiloWatt RACER
Offline
Posts: 2,496
Join Date: May 2007
Location: Houston
|
08.11.2010, 11:03 PM
There was a cable when I purchased the RX8 ESC and Truggy motor combo. But there was no sensor cable included with the buggy motor.
GTP-Pletty Big Maxximum+RX8. GTP-C50-6L Hacker+RX8. CRT.5-Pro4+ZTW esc. 24s2p EVG SX 49.6mph Ebike. 18s4p Raptor 60mph Ebike. 11.5KW |
|
|
|
|
|
|
|
|
|
|
|
|
(#12)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 57
Join Date: May 2009
Location: Florida , West Palm Beach
|
10.18.2010, 01:03 PM
Got mine 5.5... cable was in the box..... when my conversion comes i'll report in! I was told to gear tall 4 teeth taller than normal in the pinion!
 Glenn Carlson XXX-CR XX-4 WED 8IGHT E TEN SCT Losi everything!! |
|
|
|
|
|
|
|
|
|
|
|
|
(#13)
|
|
RC-Monster Carbon Fiber
Offline
Posts: 57
Join Date: May 2009
Location: Florida , West Palm Beach
|
10.21.2010, 07:24 PM
5.5 IN THE SCT TEN NOW... TEST AND TUNE AT THE TRACK SUNDAY!
       
Glenn Carlson XXX-CR XX-4 WED 8IGHT E TEN SCT Losi everything!! |
|
|
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | Rate This Thread |
Hybrid Mode
|
|
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com
