Are there any cogging issues w/ MMM and Neu?

[raptor50]

Im debating wheather I should get MMM/Neu or NOvak HV system. thanks..

[What's_nitro?]

I take it you'll be running a 4s pack since you're considering the Novak system? What vehicle will it be used in? I haven't seen/heard of any issues but there are many MMM/Neu users out there. IMO the Novak systems are not powerful enough for a MT/Truggy. That depends on how you drive I guess. But ANY MMM/Neu combo will easily be twice as powerful as the Novak. Even at only 4s.

[raptor50]

why wont the Novak HV have enough pwr? Im planning to use it in the E revo. its seems to be fast on the videos. Yes, I could only do 4S. Maybe I should spend extra and get the best. MMM/Neu. thanks..

[BL_RV0]

Originally Posted by raptor50

MMM/Neu.

Definitely.

[What's_nitro?]

Originally Posted by raptor50

why wont the Novak HV have enough pwr? Im planning to use it in the E revo. its seems to be fast on the videos. Yes, I could only do 4S. Maybe I should spend extra and get the best. MMM/Neu. thanks..

If you want some numbers, the Novak systems put out 750 watts (1HP) peak. The only advantage I see to a NoS is that thy are sensored and therefore easier to control at LOW speeds. But who drives slow these days? If you were doing nothing but racing on a tight track where you wouldn't see speeds of more that 35mph then I'd say get the Novak.

OTOH, MMM/Neu can easily make 1500 watts (2HP) peak or more AND be more effiient while doing so. It means you need better batteries, too, so plan for that. A pack that can dish out 80-100A continuously would be alright.

Like this: http://www.rc-monster.com/proddetail...=PQXP4s500025c

and then this motor for racing: http://www.rc-monster.com/proddetail...512_2dF&cat=20

for bashing: http://www.rc-monster.com/proddetail...15151ys&cat=20

for uncontrollable speed (the way I like it): http://www.rc-monster.com/proddetail...5_1.5dF&cat=20

[TexasSP]

MMM runs the Neu's smooth as butter. It also ran my Align 600xl 6 pole motor smoothly too. Easily twice the power output of the novak and much more efficient.

[raptor50]

Do you guys have a link for the MMM/Motor combo at tower? also, is the quality of the motor same as the Neu motor? who makes it? CC or Neu? thanks

Cogging? I think not :) http://youtube.com/watch?v=zdJaYMj2e-w

neu 1515 1y, MMM, TrueRC 5S 8000 mah lipo.

[TexasSP]

Mine didn't even cog with the 600xl and that's a 6 pole motor. I crawled around with it very slowly and everything was very smooth.

[DRIFT_BUGGY]

I haven't had any issues with my MMM with Cogging

[bdebde]

Ran a 1515 2.5D while my MMM was alive, smooth as butter.

[bruce750i]

http://s300.photobucket.com/albums/n...t=bb8df352.pbr lets see a novak system now. anyone?