RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Castle Creations

Reply
 
Thread Tools Rate Thread Display Modes
bad day / mmm died
Old
  (#1)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
bad day / mmm died - 12.24.2008, 07:49 PM

Well was out in the yard today with my mmm combo powered e-revo and with the a elst2 powered by a castle hydro with a xlt4 nemesis.. First off the 14 pound lst beat my 10.5 pound e-revo. I was 38mph and it was 42mph. After the first battery my motor was 128*F and the nemesis was at 192*F.

So we put in a second set of batteries and we were off(after about 20+mins to wait for his motor to cool off) well about 3mins into the run my truck just stopped! I thought that my batteries might have tanked really quickly or something . So put the 3rd set of batteries in it and still the motor doesnt beep or anything when you turn it on . The radio and steering works but nothing to the motor.

Man this kills what I wanted to do over my christmas holiday!

I hope repairs wont be 4 weeks. This stinks

Sorry to start a thread about it but man I finally had a running rc truck and a few days off work. OH WELL
   
Reply With Quote
Old
  (#2)
mikey09120
RC-Monster Stainless Steel
 
mikey09120's Avatar
 
Offline
Posts: 240
Join Date: Sep 2008
Location: xyz
12.24.2008, 08:38 PM

does it still link?


-mikey09120
   
Reply With Quote
Old
  (#3)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
12.24.2008, 08:52 PM

No it will not link.

I went to pull the esc from the truck just a few mins ago after trying the link( I have it hot glued to the truck). When I did the case came open. Well, since its open I looked at the board there is a resistor missing off the bottom of it. I am looking in my living room to see where the resistor flung to when it opened. This day is getting better and better. Man this case needs a better design to hold it together. This is the second time it has opened. The first time it opened when I Jumped the truck on the first day I had it.
   
Reply With Quote
Old
  (#4)
rat
RC-Monster Stock
 
rat's Avatar
 
Offline
Posts: 30
Join Date: Jul 2008
12.27.2008, 08:20 PM

Quote:
Originally Posted by E-fanatic View Post
No it will not link.

This is the second time it has opened. The first time it opened when I Jumped the truck on the first day I had it.
somthing in that i recon.....


Hyper 12 MMM/MEDUSA 3300kv/3S
Hyper ST MMM/FEIGAO 1390KV/6S
   
Reply With Quote
Old
  (#5)
pedeboi364
RC-Monster Carbon Fiber
 
Offline
Posts: 392
Join Date: Nov 2008
12.27.2008, 02:59 PM

cc should make a case out of g10 and put internal leds


Check out my FS thread in the General Discussion!! Help me go lipoly!!!
   
Reply With Quote
Old
  (#6)
KaztheMinotaur
RC-Monster Carbon Fiber
 
KaztheMinotaur's Avatar
 
Offline
Posts: 351
Join Date: Dec 2007
Location: Central PA
12.27.2008, 06:32 PM

Can you send it back to the hobby shop you got it from for a warranty exchange?
   
Reply With Quote
Old
  (#7)
PapaGeno21
Custom User Title
 
PapaGeno21's Avatar
 
Offline
Posts: 29
Join Date: Dec 2008
Location: Rhode Island
12.27.2008, 06:39 PM

Just out of curiosity what version is this MMM?

Sorry to hear the run of bad luck man, I hope everything goes well for ya with warrenty and turnaround on it.


If it aint broke, break it, then fix it.

My Brushless LST2 Build
My Brushless LST2 Video
My Brushless 8T Build
  Send a message via Yahoo to PapaGeno21 Send a message via AIM to PapaGeno21 Send a message via MSN to PapaGeno21  
Reply With Quote
Old
  (#8)
E-Revonut
RC-Monster RC8T
 
E-Revonut's Avatar
 
Offline
Posts: 2,554
Join Date: Jan 2008
Location: Syracuse, New York (Camillus)
12.27.2008, 07:30 PM

Quote:
Originally Posted by PapaGeno21 View Post
Just out of curiosity what version is this MMM?

Sorry to hear the run of bad luck man, I hope everything goes well for ya with warrenty and turnaround on it.
In the first post he said it was a MMM combo powered E-REVO, that makes it a v3


RC-Monster RC8T 1515 2.5D/MMM/5s RC-M 4500mah
SC10 MMPro 13.5T 2s NeuEnery 5000mah
RC18T Mamba 25/5400kv 2s lipo + 6s NiMh
   
Reply With Quote
Old
  (#9)
George16
Supermaxx
 
George16's Avatar
 
Offline
Posts: 2,031
Join Date: Oct 2007
Location: Earth
12.27.2008, 08:19 PM

Quote:
Originally Posted by E-Revonut View Post
In the first post he said it was a MMM combo powered E-REVO, that makes it a v3
Or it could easily be one of the working V2's matched with the motor. It's hard to be certain unless the original poster opens it up and see if the board's color is blue .

Sorry to hear about it. Just give Castle a call and they will take care of you.


Castle Neu 1520 on 6S LiPo Powered Gmaxx (Nitro Killer)
Predator with OS .21TM
Supermaxx with Mach .26
Revo with OS .18TZ
Kyosho ST-RR Conversion
Ofna CR with Tekin ESC/Motor (2)
   
Reply With Quote
Old
  (#10)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
12.27.2008, 10:47 PM

Its a v3. It has the blue board.

I wish I could get my lhs to exchange one for me but they havent even gotten any yet.
I think I am going to try to buy another mmm so I will have one for a spare.
   
Reply With Quote
Old
  (#11)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
01.03.2009, 12:23 AM

Well after my mmm quit I borrowed a friends bk esc and 10l feigao motor and it lasted one run and died. Just my luck. Come to find out it had issues before I got it. One of the fets weer burnt , so the guy was ok and said that he was expecting it to go any time now(just glad that wasnt me). The I took my plane out. Well you guessed it the venom esc went up in flames in mid flight(crashed and lost the plane and my flight power 3200 5s 30c lipo). The esc had issues from day one (a year ago) and no matter how much air was over it it would come down at no less that 160*F.(it was a 120amp esc and my eagle tree showed my max amp draw was only 52amps) That was a bad day. Should of gotten a castle!

Well, I ordered another mmm to get me going and it is running like a champ! Now I guess I need to send my other one off to get fixed now thats its after the holidays. I guess I will have a spare when this one comes back or I will build another project

Last edited by E-fanatic; 01.03.2009 at 12:24 AM.
   
Reply With Quote
Old
  (#12)
Joe Ford
Castle's Chaos Corner
 
Joe Ford's Avatar
 
Offline
Posts: 135
Join Date: Aug 2006
Location: Olathe, KS
01.03.2009, 12:01 PM

Yep...send it in. We'll get you fixed up.


Joe Ford
Product Specialist
Castle Creations
   
Reply With Quote
Old
  (#13)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
01.07.2009, 09:23 PM

Quote:
Originally Posted by Joe Ford View Post
Yep...send it in. We'll get you fixed up.
Joe I have an issue. I have emailed superfastrc twice for a receipt with no luck. I bought the combo from him on 12/2/08. So I have no reciept to send with it . Will it still be ok to send it. I have the reciept from the new mmm I just got but not for the combo

Thanks!
   
Reply With Quote
Old
  (#14)
E-fanatic
Brushless only!
 
E-fanatic's Avatar
 
Offline
Posts: 312
Join Date: Sep 2008
Location: obx NC
01.03.2009, 12:25 PM

Thanks joe, I will send it out first thing monday!

I just put my stock tires back on my e-revo and regeared(the plastic wheel hex on the losi rims stripped out, the set pin ripped threw the hex) Now thats power ! and my e-revo is now running 44mph on 4s and still staying cool! Thanks again castle!

mmm combo in the e-revo and a 120 hydro powering the lst2

Last edited by E-fanatic; 01.03.2009 at 12:28 PM.
   
Reply With Quote
Old
  (#15)
suicideneil
Old Skool
 
suicideneil's Avatar
 
Offline
Posts: 7,494
Join Date: Feb 2007
Location: Devon, England
01.03.2009, 02:45 PM

I thought the LST2 was a big truck...

My only concern is what kv the xlt motors actually are, as FD refuse to give any specifc details, only some 'on paper' wattage they can produce....
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com