3 speed adjustment

[coolhandcountry]

I like to know how you adjust the three speed tranny. I can adjust the second gear easy. I don't know how to do the thrid gear. There is two holes in the side. One is for second the other is for a gear. Some one has ideas. Does it even need adjusting?

[crazyjr]

according to rc car action theirs didn't need adjustment, but if you do you have to take the tranny apartto get to the third gear adjustment

[coolhandcountry]

well I got it to shift to second. I have not got thrid yet. I changed the clutch bell back to a 15 from a 17. That sucks to take tranny apart for adjust ment. That is not good. I don't know how much I have to change for it to work right. :( Could I drill a hole and put a plug in it like the first gear. Where was that article at jr.?

[Serum]

Check this thread Buddy..

[coolhandcountry]

Well I took the tranny apart. I can adjust thrid like the second in a two speed. I can not adjust the 2nd gear with out taking tranny apart and pulling the gears off shaft. This is excess work for a few rpm difference. I think the 2 speed is better for this. I may put the 2 speed back in for the easier access. I read up on that though Serum. Thanks!