FLM half case and G1 single speed.

[RC Fan 4 Life]

for thouse of you who have this does using only 4 screws hold the trans in good? Did you only use 4 screws to hold down the chassis braces?

Do you need to put any grease in the trans?

[squeeforever]

i think a little grease wont hurt. as for sturdiness i think it should be just fine.

[nitrostarter]

It should be very sturdy, 4 screws into a CNC'd aluminum case instead of a plastic case. The aluminum wont give or strip out like the plastic might.

[squeeforever]

just remember to use thread locker.

[RC Fan 4 Life]

Do you need to put any grease in the trans? If so what kind that i can get from a auto store.

[squeeforever]

no grease. i would just put a very little on the gears if you run a steel idler. you wont need much at all. i just use associated black grease.

[Serum]

I use dry lube in the transmission.. grease won't stay put.. at 7000 rpm, it wil fly off..