mounting esc switch to servo - RC-Monster Forums

tallyram · **mounting esc switch to servo -** 06.29.2006, 01:56 AM

i was wondering if using servo tape to attach the esc power switch to the hitec 5955tg servo would lead to any problems?

phidailo · 06.29.2006, 03:54 AM

hope it doesn't cause i have my receiver switch on the stock throttle servo....have had it on for 2 months with nothing wrong

HotnCold · 06.29.2006, 06:49 AM

I would tend to agree - the case of the servo is plastic if i recall correctly - so you should be alright...

tallyram · 06.29.2006, 10:45 AM

it looks like it might have a built in heatsink on it. will that affect anything?

HotnCold · 06.29.2006, 11:36 AM

Im not too sure - i havent tried to feel the temp on the side of the servo - it is a high output servo - but i dont know exactly how hot the servo will get. Maybe someone with some experience with the servo will chime in and help ya out...

tallyram · 06.29.2006, 12:49 PM

thanks hnc. should be o.k. i had it mounted to my esc, and that was to hot for servo tape. it should be o.k. on the front of the servo. thanks again, tally.

HotnCold · 06.29.2006, 07:26 PM

No problem - enjoy!!