What is the best motor to put on the e-savage?

The title say most..



What's the best motor i can put into my E-savage with 4s lipo?


I want a nitro killer in both acc and topspeed :D

[jollyjumper]

well, it kinda doesnt go up.
the lehner is, as the name goes, a basic.
so it is their low end motor.
the nue on the other hand is a high end motor.
what would you want?
also keep in mind that the nue requires a mgm compro or quark.

[Serum]

a lehner is 36mm in diameter and a neu without fins 39. perhaps the 39 doesn't fit the e-savage?

[Serum]

Welcome to the forum bytheway!

[jollyjumper]

yeah welcome aboard.
also with the basic xxl you have a 4mm shaft, no 32p pinion with 4mm bore.
so that would have to be custom drilled.:026:

Well, but 2000watt is more than all the other motors??

the std motor is a 550 sized, 55mm diameter?

[jollyjumper]

the neu 15 series are in between 700 and 3000 watts.
the stock motor are 36mm.
how much room do you have for your motor?

[Serum]

No, a 540/550 motor is 36 mm in diameter

[Serum]

Guys, cursing isn't helping any of us.
Jolly, it's not a contest..


Don't stare at the 2000 watt thing too long.

Please read the sticky i wrote in the brushless section, it will explain quite a bit.

[jollyjumper]

sorry bout that.
keep in mind; the power the motor produces depends on the batts.

66mm long, 40mm in diameter..

[jollyjumper]

you have that much room?
then i'd say a neu 1512/2.5d 2000Kv or maybe 15122d 2600Kv
but then again, what do i know:p

i need speed too ! :P..


a feigao 8-10l have more kv than that?

[Serum]

Did you read the thread i suggested you?

Now i did.... but i want a nitro killer in speed too not just acc.. so 45mph would be nice.. and thats why i'm reading here.. to find the right motor for me..