extra long gmaxx - RC-Monster Forums

coolhandcountry · **extra long gmaxx -** 07.28.2005, 07:40 PM

I have the gmaxx chassis. I have used the extension in the rear. I want to know if any one has tried to extended the front an inch as well as the rear. I am in the process of making the skid and top plate for servos.

RC-Monster Mike · 07.28.2005, 08:39 PM

Never tried it. The extended g-maxx is a nice length, allowing great handling without having a negative effect on the turning. I would be curious to know how it turns out, though!

coolhandcountry · 07.28.2005, 09:02 PM

I am to mike. I was just wondering if someone else may have did it. I have to let you know.

RC-Monster Mike · 07.28.2005, 09:08 PM

It would be easy enough to do.

coolhandcountry · 07.28.2005, 09:19 PM

I have assembled the front part. I just need to fix my rear and shocks so can take it out.

RC-Monster Mike · 07.31.2005, 09:53 AM

Well....How does it work?

coolhandcountry · 07.31.2005, 02:38 PM

I don't know yet mike. It still looks like the pic. I have not fixed my rear. Did fix shocks though. There is no gears in the rear end. I tore the teeth off the pinion shaft. Need to get them 7.5 ordered. I get it back together.

Mike_D · 07.31.2005, 03:14 PM

Hey cool did you get your pro3 yet, and if so whats your opinion so far?

coolhandcountry · 07.31.2005, 03:34 PM

Haven't got it yet mike d. Expect it this week. I have to get my pinion gear so i can get the truck back going. I let you know. If it survives me it is doing good. I seem to be hard on my truck.

Jason C · 07.31.2005, 06:16 PM

Hey Country were did you get that alum tranny?

coolhandcountry · 07.31.2005, 07:53 PM

Jason c I sent pm. I don't want to advertise other sites on mikes. I did it once and realized what i did after. so i sent pm.

coolhandcountry · 08.01.2005, 06:18 PM

Hey Mike or any one else that may know. On the front a arms of the integy pro 3 suspension. I want to know what you supposed to use for setting up the top a arms where they mount to bulk heads. I have the group of little white washers. Is that what i am suppose to use.

coolhandcountry · 08.01.2005, 06:37 PM

On the integy pro 3 suspension. My rd logic cvd seem to short. If i take the knuckle in the turn buckle seem to long. Any suggestions.

RC-Monster Mike · 08.01.2005, 06:56 PM

Yes, the white spacers are for the uper arms. I use the stock black clips(easier) on mine, though. Also, the RDLogics cvds will work, but you have to turn the pillow balls in as far as you can(without binding/limiting steering/suspension movement). You will have to mess with the turnbuckle length once you get it all set up.

coolhandcountry · 08.01.2005, 07:19 PM

Thanks mike. On the turn buckles. Did you use the stock or integy ones? The integy seems to long.