my brushless build>>>yusa rally onroad<<<

[snellemin]

Here's a vid of todays TNT Dragrace. Tash Yusa is in there.
Thanks Sleeb for the vid.


http://www.youtube.com/watch?v=_gjWzlmtJLc

[lutach]

Originally Posted by tashpop

got some run time today. brought it out to the rc drag races. tires suck, so some foams are in order, and i'm still not getting 2nd gear. they told me i hit 51mph on my first pass. after that i was hitting 46-45mph each pass which is right where its geared in 1st gear on this voltage(26v). the size and flashy paint turned lots of heads. i'm really liking the car and motor. at the track, esc got to 105 and motor was 115 i think. after i got back home, i beat on it a little. full speed pass after pass back in forth infront of the house and lots of drifting manuvers. after about 10mins of constant bashing i checked temps. esc was 114 on the heatsink 119 on the caps and motor was 160. i really need to get that 2nd gear working. it should get the motor happy. i think im over winding it being stuck in 1st.

tom255, i see what you're saying about the esc. i have no issues with it though. it does take off a little on the soft side, but putting out this much power i would have to feather the throtle anyways. in a heavy truck that im trying to get wheelies or flips from a stand still, i could see the issues, but for this car its great.

I had the same problem with my RS4 Pro 2 with the 2-speed tranny. I spent a few minutes doing little tweeks to the tension on the spring. I have to get that car out of the basement. You guys will love how it looks.

[tashpop]

i think my problem is not knowing which screw to adjust with. i think i could be adjusting the wrong one, because i'm not getting a responce from it. i'll just pull it apart and see whats going on in there.

thanks for posting the vid. the first pass i made on that vid does look faster than the second, maybe i did get that 51mph.