looks like novak has some new hv stuff

[lincpimp]

Originally Posted by suicideneil

Ooh, interesting conversion. The venom price isnt too bad, but then again, it is the same as the MMM, only 4s instead of 6s- MMM please. Sensored 6s would be awesome though, if only Novak would give us some decent beefy motors...

We will see how well the mmm handles 6s. I just pre-ordered one from mike, and have a 10xl coming from another member here. Both are going in a hyper st truggy, and I will use the motor brakes, and a neuenergy 3900 6s lipo. Going to try to make the truggy as light and simple as possible.

[lutach]

Originally Posted by lincpimp

Nice looking rc lutach. Was it hand made? I am guessing that you would rate the HW esc better than the novak. I may have to get one, as my mm in the crt.5 with the hv6.5 is not doing so well. Lots of stuttering from a standstill.

The person that made the conversion did a very nice job. The shock towers seems to be the only custom made part and the arms are from Losi and Associated. I like the HW very much. HW won't be selling the 120A or 60A here in the US, but you can get the Venum which is the same.

[lutach]

Originally Posted by suicideneil

Ooh, interesting conversion. The venom price isnt too bad, but then again, it is the same as the MMM, only 4s instead of 6s- MMM please. Sensored 6s would be awesome though, if only Novak would give us some decent beefy motors...

When I started talking with HW they didn't have a car model planned. I asked them for 6S minimum and also a HV 12S controller, but this controller is for 1/10 scale. They are going to make a 6S controller for 1/8 scale, but I don't know much about it yet.

[gixxer]

well they finally listed the info on there site.
http://www.teamnovak.com/products/br...5mm/index.html
the 7.5 is 3000kv

[Serum]

Imagine a 7.5 on 10Ah 14.4V.. it would run all day..

[DRIFT_BUGGY]

Tower now has must of their 1/8 scale conversion kits due early may