MMM's are shipping

[titan]

Originally Posted by joeling

MTBikerTim 1
DRIFT_BUGGY 1
Joe Ling 0
Titan 0 (Germany)

I have to wait, too


Titan

[skellyo]

Oh boy are they shipping...

I placed a pre-order with Tower back on April 17th when they were listed for $164.99 (got $15 off of that, so $149.99 shipped). Well, I never did cancel the backorder and they apparently have gotten some in stock...at least enough that they are packing mine up to ship right now.

This means by this time next week, I should have 3 MMM's.

[e-mike]

3 mmm you can sell one off themim still waiting,, ive placed my order to mike 25/04/2008..

[bruce750i]

Tower billed my account today also. Never been so happy to get a bill.

[DRIFT_BUGGY]

Originally Posted by skellyo

Oh boy are they shipping...

I placed a pre-order with Tower back on April 17th when they were listed for $164.99 (got $15 off of that, so $149.99 shipped). Well, I never did cancel the backorder and they apparently have gotten some in stock...at least enough that they are packing mine up to ship right now.

This means by this time next week, I should have 3 MMM's.

Just put 1 buy-it-now on ebay for $500 and you'll have them paid off

[DRIFT_BUGGY]

Originally Posted by bruce750i

Tower billed my account today also. Never been so happy to get a bill.

Far out, how to quickly check I cancelled my back order with Tower. Luckly I did or I would have to do alot of explaining to the wife

[ICUBoy]

Originally Posted by MTBikerTim

Install it. I ran mine just then and this thing is amazing. Bottom end power is insane and the MMM is so smooth it is incredible. Didn't get to see what the top end is like. The only thing on my truck that I am disappointed with is the steering. The lengthened chassis hasn't done my turn radius any favours.

Phew! I can finally take a deep breath- I bin holding my breath since you first posted that it was in Australia! I hope you have good luck with it- the posts about failures are dis-turb-ing!

[DRIFT_BUGGY]

Originally Posted by MTBikerTim

Install it. I ran mine just then and this thing is amazing. Bottom end power is insane and the MMM is so smooth it is incredible. Didn't get to see what the top end is like. The only thing on my truck that I am disappointed with is the steering. The lengthened chassis hasn't done my turn radius any favours.

Great news. Was this in the Savage? What motor and battery were you using?

[tc3_racer_001]

hey icu, when did you order? any confirmation as of yet or are we in the 2nd batch? (wouldnt mind anyway...)
ryan

[DRIFT_BUGGY]

I thought the 2nd batch has been sent & the 2nd batch comes with 6.5mm bullets. Did yours come with bullets MTBikerTim?

[Pdelcast]

Originally Posted by DRIFT_BUGGY

I thought the 2nd batch has been sent & the 2nd batch comes with 6.5mm bullets. Did yours come with bullets MTBikerTim?

I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick

[DRIFT_BUGGY]

Originally Posted by Pdelcast

I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick

Right-o, thanks Patrick. I ordered bullets anyway, so the bullets don't worry me

[skellyo]

Originally Posted by Pdelcast

I think we are confused here -- The second BUILD of MMM has not yet happened. There have been several batches built, but all of those are wired controllers.

The second build will take place a little later this month, we are still waiting on a couple of parts. The second build will have the SMT 6.5mm connectors.

Patrick

With the 6.5mm SMT connectors, will you be able to use the pick & place machine on those to reduce manual soldering time? I can imagine that it's probably a strange part to try and have placed, especially if you have tight tolerances on the plated through holes.

I'm just curious...the engineer in me wants to know.

[Pdelcast]

Originally Posted by skellyo

With the 6.5mm SMT connectors, will you be able to use the pick & place machine on those to reduce manual soldering time? I can imagine that it's probably a strange part to try and have placed, especially if you have tight tolerances on the plated through holes.

I'm just curious...the engineer in me wants to know.

Good question. :)

They will be placed by hand, after pick and place, but before reflow. :)

[DRIFT_BUGGY]

Well mine is now @ Post Office in AUSTRALIA at 1:04 AM. So should more than likely be in my hands today