RC-Monster Forums  

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Mamba Monster fires.
Old
  (#1)
Mozzy
RC-Monster Carbon Fiber
 
Mozzy's Avatar
 
Offline
Posts: 280
Join Date: Apr 2008
Mamba Monster fires. - 05.20.2008, 05:41 AM

Hey guy's,

I just received a disturbing call from my hobby shop mate, www.rcgarage.com , asking if I'd heard of any MMM's catching fire.

Has anyone heard of this happening??

We're thinking that it's possible with stupid people, running stupidly powerful &/or crap motors, crap batteries &/or incorrect gearing.
Any thoughts?

BTW, I ran mine today in my CRT with Neu & a maxxamps 14.8 6000mAh & it was a rocket, think I have to tone it down alot, so, those nitro's have half a chance at keeping up!!

Also, is the internal BEC adjustable to increase the output to 6V? If so, how?

Last edited by Mozzy; 05.20.2008 at 05:43 AM.
   
Reply With Quote
Old
  (#2)
DRIFT_BUGGY
RC-Monster Brushless
 
DRIFT_BUGGY's Avatar
 
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
05.20.2008, 06:08 AM

Check out this topic about increasing the output on the BEC http://www.rc-monster.com/forum/showthread.php?t=11957


Losi 8ight
MMM V1 w/1.20
Airtronics MX3 2.4Ghz
TP 5S 5000mah
Neu 2.5D/F
   
Reply With Quote
Old
  (#3)
Mozzy
RC-Monster Carbon Fiber
 
Mozzy's Avatar
 
Offline
Posts: 280
Join Date: Apr 2008
05.20.2008, 07:09 AM

Thanks for that DB.

Hey, where in Aust are you?
   
Reply With Quote
Old
  (#4)
jhautz
RC-Monster Mod
 
jhautz's Avatar
 
Offline
Posts: 4,217
Join Date: Apr 2006
Location: Chicago, IL
05.20.2008, 07:42 AM

Its certainly possible to incinerate one if you do something bad. You can do it to any controller. I have had a few controllers go up on me in the past, but not a MMM yet. I did read somewhere about one going up, but it sounds like they had a severe battery wire short that caused the problem. I wouldnt think there is any more problem with the MMM than any other controller on the market.


I can't decide if its more fun
to make it...
or break it...


Silent...But Deadly


   
Reply With Quote
Old
  (#5)
DRIFT_BUGGY
RC-Monster Brushless
 
DRIFT_BUGGY's Avatar
 
Offline
Posts: 2,077
Join Date: May 2007
Location: Australia
05.20.2008, 07:55 AM

Quote:
Originally Posted by Mozzy View Post
Thanks for that DB.

Hey, where in Aust are you?

Central QLD


Losi 8ight
MMM V1 w/1.20
Airtronics MX3 2.4Ghz
TP 5S 5000mah
Neu 2.5D/F
   
Reply With Quote
Old
  (#6)
TexasSP
Something, anything, nothing
 
TexasSP's Avatar
 
Offline
Posts: 2,747
Join Date: Mar 2006
Location: Houston, TX
05.20.2008, 11:17 AM

The only real problem I see with the Monster versus other controllers, is that the price point and relative ease of setup has potentially put a very powerful controller into the hands of morons who will not set it up properly.

I can't tell you how many threads I have already seen on the traxxas boards alone trying to use the monster with crap setups and then arguing ensues when you don't agree with them. People see to think there is some cheap way to get into brushless in monster trucks and 1/8th scale which I think is a big culprit for potential problems.


www.cubicle101.com
A friends comic strip website.
   
Reply With Quote
Old
  (#7)
Mozzy
RC-Monster Carbon Fiber
 
Mozzy's Avatar
 
Offline
Posts: 280
Join Date: Apr 2008
05.20.2008, 11:18 AM

Central Qld? Too far to visit our track in Vic.

I agree Tex. I started with my BLST on the cheap side, but, after seeing my mate toast a motor & ESC I decided to go a high quality ESC & batteries. Motor's (Feigao) are cheap enough to trash.

I think I may have solved the problem of the BEC not providing enough power too.........my Spektrum Pro receiver was glitching a bit at the track, so tonight, I swapped it for one of my Spektrum Micro Pro's (brand new) & the wheels would turn on the carpet easily.

However, I've yet to try it on the grass.


Losi SCTE SC4 Pro 4000kv, Tekin RX8, 2S
MP7.5 Kanai III Tekno Neu 1515/2.5D 1700kv MM 4S
LST 2 Carbon CC 1717 1Y 1580kv MM 6S
Futaba 3PKS Spektrum Pro

Last edited by Mozzy; 05.20.2008 at 11:22 AM.
   
Reply With Quote
Old
  (#8)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.20.2008, 11:43 AM

Quote:
Originally Posted by Mozzy View Post
I think I may have solved the problem of the BEC not providing enough power too.........my Spektrum Pro receiver was glitching a bit at the track, so tonight, I swapped it for one of my Spektrum Micro Pro's (brand new) & the wheels would turn on the carpet easily.

However, I've yet to try it on the grass.
The power delivery issue sounds like dirty connector pins to me. The negative and positive supply wires are paralleled on all the receiver pins. So, the only thing that would affect power delivery would be the PCB traces connecting the pins, or the pins themselves.

The glitching could also be caused by dirty receiver pins, especially the signal pin. Or, maybe the antenna wire is broken (either partially or intermittently). I had a Spektrum receiver that glitched. After I replaced the antenna wire, the glitching went away.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#9)
Mozzy
RC-Monster Carbon Fiber
 
Mozzy's Avatar
 
Offline
Posts: 280
Join Date: Apr 2008
05.20.2008, 11:53 AM

Thanks for that Brian, I'll check it out tomorrow.

Bedtime for me.


Losi SCTE SC4 Pro 4000kv, Tekin RX8, 2S
MP7.5 Kanai III Tekno Neu 1515/2.5D 1700kv MM 4S
LST 2 Carbon CC 1717 1Y 1580kv MM 6S
Futaba 3PKS Spektrum Pro
   
Reply With Quote
Old
  (#10)
macr0w
RC-Monster Carbon Fiber
 
macr0w's Avatar
 
Offline
Posts: 225
Join Date: May 2007
Location: Charlotte NC
05.20.2008, 12:24 PM

Say what you will.

I may indeed be stupid but this was run with a Neu 1512/1.5/D/F and a Polyquest 25c 5000 mah 4s pack. And it was geared 11t/46t in an MBX-5.


Last edited by macr0w; 05.20.2008 at 12:26 PM.
   
Reply With Quote
Old
  (#11)
slow-stampede
RC-Monster Stock
 
Offline
Posts: 43
Join Date: Jun 2005
05.20.2008, 12:26 PM

That looks just like mine! Castle says it's probably cuz my motor (7xl) got demagged.
   
Reply With Quote
Old
  (#12)
Robert
RC-Monster Carbon Fiber
 
Offline
Posts: 142
Join Date: Sep 2007
05.20.2008, 12:38 PM

Quote:
Originally Posted by TexasSP View Post

I can't tell you how many threads I have already seen on the traxxas boards alone trying to use the monster with crap setups and then arguing ensues when you don't agree with them.
There's absolutely no credibility on that board. It's run by kids and it's for kids. I think we will all agree to that.
   
Reply With Quote
Old
  (#13)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.20.2008, 12:52 PM

Not to mention the rules are very "fluid" there. I got 20 warning points for the word "crap" and then the same day saw several posts/threads with the same word (and worse) with no repercussions. Needless to say, I don't go there very often.

That's ok though because I get tired of the same questions over and over and over and over and over again. I feel like telling them to sell their vehicle and get a Tyco because the stupidity level of the questions shows they aren't ready for such a vehicle.
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Old
  (#14)
lxmuff
RC-Monster Carbon Fiber
 
lxmuff's Avatar
 
Offline
Posts: 111
Join Date: Jun 2006
05.20.2008, 12:56 PM

Quote:
Originally Posted by BrianG View Post
Not to mention the rules are very "fluid" there. I got 20 warning points for the word "crap" and then the same day saw several posts/threads with the same word (and worse) with no repercussions. Needless to say, I don't go there very often.

That's ok though because I get tired of the same questions over and over and over and over and over again. I feel like telling them to sell their vehicle and get a Tyco because the stupidity level of the questions shows they aren't ready for such a vehicle.
You mean like "how much run time I can get?" or "how fast will this setup go?"


Thanks for sharing your meltdown Mark. It must have been one of those bulletproof ones.
   
Reply With Quote
Old
  (#15)
BrianG
RC-Monster Admin
 
BrianG's Avatar
 
Offline
Posts: 14,609
Join Date: Nov 2005
Location: Des Moines, IA
05.20.2008, 01:01 PM

Quote:
Originally Posted by lxmuff View Post
You mean like "how much run time I can get?" or "how fast will this setup go?"
Exactly. It's not rocket science. If you get 10 minutes with 3.3Ah cells, then you'll get around 13-14 minutes with 4.6Ah, and so on. And there are tools out there to calculate speed. They just need to take a couple of minutes and just try to come up with an answer instead of asking the first question that pops into their head. Many times, the SAME question is asked by someone else just a few threads down on the list!
  Send a message via Yahoo to BrianG Send a message via MSN to BrianG  
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump







Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
vBulletin Skin developed by: vBStyles.com